Competent, Consistent, & Compliant Posiclear™ Capsule Filters Medical Device Bacteria & Endotoxin Control For Portable Reverse Osmosis Systems & Dialysis AAMI Water Points of Use. Control of bacteria and endotoxin contamination in a hemodialysis water system is a critical parameter. Selection of a final filter requires demonstrated endotoxin removal and economical performance. The Posiclear filter is FDA 510(k) cleared and uniquely designed for use on portable and central water treatment applications. The Posiclear filter is manufactured with a positively charged pleated Nylon 6.6 filter membrane and removes bacteria and endotoxin from the liquid by size exclusion and adsorption mechanisms. To help keep the water system clean, the filter is compatible with hot water (90°C) and peracetic acid disinfection procedures. Posiclear™ Membrane Advantages Absolute Bacterial Retention Robust Membrane Construction Reliable 0.2 μm validated performance. Meets FDA definition of 0.2 μm sterilizing grade filter. Pleated membrane design ensures consistent performance to specifications. Enhanced Removal of Negatively Charged Contaminants Performance Engineered Capsule Design Posiclear is manufactured with a positively charged Nylon 6.6 filter membrane. This feature provides enhanced retention of negatively charged contaminants including bacteria, endotoxins, viruses and nucleic acids. Polypropylene structural components (end caps, adaptors, inner core and outer cage) are used in the fabrication of Posiclear filter capsules assuring exceptional thermal, mechanical stability and optimal service life. Regulatory Compliance & Quality Assurances High Capsule Flow Rates Posiclear endotoxin filters are 100% integrity tested during manufacture to eliminate possible defects. High pleated surface area offers a high flow rate (up to 2 gpm / capsule).

Technical Data Connection Configurations Posiclear Capsule Filter Specifications Part Number 3027589 Capsule w/ 2 air bleed connectors Capsule Filter Rating Maximum Flow Rate (gpm) Materials of Construction Membrane Membrane Support Layer Pleat Support/Drain Layers Core, cage, end caps, and adaptors Sanitary triclamp Silicon O-Ring Capsule Dimensions Length (L) Filtration Surface Area Operating Parameters Max. Temp Filter Performance A decrease in flow may indicate that the filter is clogging* or the capsule is air locked**. Typical filter pressure drop is low (a few PSI). Air may accumulate...