Particle Counter TCC


Catalog excerpts

Particle Counter TCC - 1

The particle counter TCC is a control system for measuring the number and size of particles in liquids and gases. The measuring system is suitable for the stationary use. The TCC monitors three size classes which can be chosen freely and transfers the number of particles either as an analog signal (Power f.e. 4..20mA) to a SPS or to the RS232. For every channel limits are settable, which monitor the degree of pollution and give out an alarm signal if need be. The measuring mode of the TCC focus only on time-related measurements, so that the flow rate through the laser sensor must be held sufficiently constant. (Flowcontroller o.s.). Standby-Mode Measuring Mode Measuring Time / Interval Time Channels / Measuring Range Measurement output Alarm gauge Sensor control Power supply Dimensions / Weight LCD-Display for measurements/ LEDs for status information, drain of measuring is also controllable through SPS or BUS-interface, Keypad for manual operation Sleep-Mode over SPS- or Bus-Command (RS232, CAN, PROFI) Single measurement, continuous or interval measurement Measuring -, Interval Times freely programmable Three measuring channels with freely eligible size classes Particle number as a power signal (0-20mA, 4-20mA), over RS 232 Option: CAN-, PROFI-BUS) Adjustable for every channel, output over relay contact or rather digital exit Readiness and pollution 18-36VDC, max. 10 W 210 x 160 x 120 (L x B x H)mm / 1.5kg Particle sensors Markus Klotz GmbH Theodor-Heuss-StraUe 23 75378 Bad Liebenzell Phone 07052/92336 Fax 07052/92338 E-mail

Open the catalog to page 1

All Markus Klotz GmbH catalogs and technical brochures

  1. PCSS Air Net

    2 Pages