EQUIPMENT FOR LEAK TESTS BY ABSOLUTE PRESSURE DECAY • Leak test with full scale up to 30 bar and in vacuum • Resolution up to 0.1 Pa (0.001 mbar) • 7” colour LCD with touchscreen • 300 test programs • 300 test sequences • Digital I/O interfaces for PLCs, RS232/ RS485 serial lines, USB for PC, Ethernet, Profinet DESCRIPTION TL3P is an innovative device for leak Its high measurement resolution The control of external automations, tests by absolute pressure decay and test accuracy, together with the the interface with barcode, Qrcode electronic regulation of the filling readers and printers and the possibility The touch interface, with the color pressure, allow to perform not only to manage and record the tests, make display and the testing real-time view, leak tests but also destructive burst it a complete and suitable instrument make the programming and use simple test, safety valves opening checks, for the most modern production volumetric control, obstruction tests, “in bell” tests on sealed products also by interception method. TESTING MODES Pressure leak: leak tests under pressure with absolute pressure decay measurement. Volume + pressure decay: leak test with volume control of the test circuit. Blockage: type of test to check for obstructions in the component being tested. Resistance: type of test to verify the compressive strength and the sealing capacity of the component being tested CALIBRATION SERVICE Each equipment is accompanied by a calibration report released by Tecna. According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test masters. Tecna and Marposs, through specialized personnel and certified instruments, offers a complete scheduled calib

Provaset T3LP SPECIFICATIONS Power supply Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1 Calibration Reports or Certificates Software-guided procedure with sample instruments. Pressure Regulator Electronic, with dedicated pressure transducer to visualize the regulated pressure on the display; alternatively manual regulator 7” colour TFT LCD display with resistive touchscreen 4 LED lights (testing phases, pass/reject outcome) Test counter Passed and Rejected totals, resettable to zero Audible alarm Built-in beeper with programmable duration Programmable parameters...