Provaset T3LPQ INSTRUMENT FOR LEAK TESTS WITH THE DIRECT MEASURE OF THE LEAK FLOW RATE • Leakage measure with mass flow sensor: ≥ 2 cm³/min up to 100 cm³/min • Resolution up to 0.01 cm³/min • Electronic regulation of the test pressure from 5 mbar to 1 bar, 2 bar depending on test conditions • 300 test programs and sequences • Digital I/O interfaces, RS232/RS485 serial lines, USB for PC and Ethernet DESCRIPTION Provaset T3LPQ is an electro- The touch interface, with a colour automations, the connection with pneumatic instrument, designed display and a real-time view of the tests barcode, Qrcode readers and printers for testing air tightness by direct and the possibility to record the tests on USB memories or via Ethernet make The balanced pressure method allows it a complete and suitable instrument to obtain measurements that are all industrial segments, on testing for the most modern production independent from the tested volume benches, in production lines or in fully and it offers the best stability and automated systems. Finally, the control of external MEASURING THE LEAKAGE FLOW At the end of the phases of filling and settling, the pressure is maintained constant by the internal electronic controller. The flow that originates therefore corresponds to the flow required to maintain the product under test at the programmed test pressure and thus corresponds to the leakage flow. The leak is measured continuously allowing the operator to immediately execute processes of adjustment or repair. This method is very effective and flexible and allows a significant reduction of the test time. CALIBRATION SERVICE Each equipment is accompanied by a calibration report released by Tecna srl. According to the requirements of ISO9001 standard, calibration must be verified at specified intervals against national or international test masters. Tecna srl, through its specialized personnel and certified instruments, offers a complete scheduled calibrat

Provaset T3LPQ SPECIFICATIONS Power Supply Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1 (1:2:1) Calibration Reports or Certificates Software-guided procedure with sample instruments. Pressure Regulator Electronic, with dedicated pressure transducer to visualize the regulated pressure on the display 7” colour TFT LCD display with resistive touchscreen 4 LED lights (testing phases, pass/reject outcome) Test counter Passed and Rejected totals, resettable to zero Audible alarm Built-in beeper with programmable duration Programmable parameters 300 testing tables...