DeltaTM3PD MODULE FOR LEAK TEST WITH DIFFERENTIAL METHOD ON AUTOMATED SYSTEM • Leak test up to 40 bar • Resolution up to 0.1 Pa, differential full scale from 10 to 50 mbar • Fully integrated pneumatics and electronics • Test time reduced • Ease of use and installation • Digital interface for PLC • Communication Interfaces RS485 and USB • Up to 300 test tables DESCRIPTION The testing cycle is based on a comparison between the product being tested and a reference volume. In this way, the effects of the pressure settlement inside the tested product are reduced and the accuracy in detecting a leak rate is increased, achieving excellent results in a quicker testing time. TM3PD DELTA TM3PD pneumatic modules represent the blend of traditional leak test equipment and are the best solution to integrate a reliable and compact testing station into your automated system. DELTA TM3 can be interfaced with: • SOFTWARE MANAGER

SPECIFICATION Power Supply Dry, non-condensing, 5-micron filtered, and oil-free air, compliant with ISO8573-1, 6x4 mm hose fitting hose connection 4x2.5 / 6x4 / 8x6 mm Pilot pressure compatible with the instrument full scale Sensor Calibration Remote control software procedure Pressure Regulator External (option) 4 LEDs: two yellow (test phases), green (passed), red (failed) Test Counter PASSED and FAILED totals, resettable to zero Date and time, with supercap, 7 days back up max Programmable parameters Up to 300 testing tables, general testing parameters 2 photocoupled inputs: START / RESET...