Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. Marque Ambulance
  3. Commando

Commando

Commando
1 / 2 PagesView full catalog

Commando

Product catalog summary
Overview: The document outlines the specifications and features of a modular vehicle body designed for emergency services, highlighting its robust construction and advanced features.
Body Construction: The vehicle features a fully welded, roll cage design with a 2”x2” tubular structure, ensuring durability and safety. It includes a seamless exterior body construction, independent aluminum bulkhead, and a crowned roof to prevent water pooling. The rear bumper is hinged for high-angle departures.
Materials and Design: The body side skin is .125 thick for added strength, with aluminum diamond plate compartments and rub rails. Stainless steel fender flares and exclusive LED corner lights are also included.
Doors: The vehicle is equipped with Eberhard automotive style latches, seamless hybrid doors with .125 skin, and integrated door seals. Door liners are attached with stainless steel screws into aluminum automotive clips.
Interior Features: The interior includes eight dual filament dome lights, a 400,000CP hand-held spotlight, and a Ferno-Washington 175-4 cot mount. Flooring is Lon Seat “Lon Plate II”, with dual IV holders, a Rico RS-4X disposable aspirator, and multiple oxygen and vacuum outlets. The technician seat is high-back automotive style with a swivel base.
Storage and Upholstery: The vehicle includes ALS cabinets for trauma kits, seamless cushions, and dowel construction cabinets with aluminum trim.
Power Distribution/Electrical: Features a printed circuit board, marine grade high current switches, magnetic/LED diagnostic circuits, and multiple electrical outlets including 125V GFI protected and 12V outlets.
Lighting and Siren: Equipped with Vanner solid state flasher, Whelen perimeter and scene lights, and a 97Db back-up alarm with momentary cutoff.
Environmental Control: The vehicle has a ducted A/C-heat system with ceiling vents, a 650 CFM blower unit, and automatic thermostat. Insulation includes fiberglass batts and block foam.
Contact Information: Address: 2737 N. Forsyth Rd, Winter Park FL 32792. Phone: 888.999.2175. Web: www.marqueambulance.com. Email: [email protected].
See more

Catalog excerpts

Commando-1

Marque Exclusive Corner Lights Rear Transitional Bumper WHERE YOUR VISION COMES TO LIFE • Fully Welded, Roll Cage Design, 2”x 2” Tubular Structure • Seamless Exterior Body Construction • Independent Aluminum Bulkhead • Crowned Roof Ducted Heat/AC System

 Open the catalog to page 1
Commando-2

CHASSIS TYPE I & TYPE III • Ford • Chevy • Dodge • International Due to constant product improvements; specifications, component parts and optional equipment are subject to change without notice or obligation. Photos may show optional equipment. STANDARD FEATURES Body • Modular Body: Fully welded, roll cage design, 2”x2” tubular structure • Rear Bumper: Entirely hinged to allow tilt in high angle departure situations • Crowned roof to inhibit water pooling • Oxygen Storage: Streetside front compartment zico QRMV rack for M-size cylinder • .125 Body Side Skin: Added strength and seamless finish...

 Open the catalog to page 2

All Marque Ambulance catalogs and technical brochures

  1. Remounts
    Remounts

    1  Page

  2. Type II - Sprinter
    Type II - Sprinter

    2  Pages

  3. Type II - Squad 2
    Type II - Squad 2

    2  Pages

  4. Brigadier
    Brigadier

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.