Board Dimensions
Typical dimensions for the board are specified as follows: Width is 2.0 inches, Length is 2.5 inches, Thickness is 0.062 inches, Top Height is 0.2 inches, and Bottom Height is 0.1 inches. The Mounting Hole diameter is 0.125 inches.

Connector Data
The board includes two types of connectors: a Power and Communications Connector and a Sensor Connector. The Power and Communications Connector has 10 pins arranged in 2 rows of 5, while the Sensor Connector has 20 pins arranged in 2 rows of 10. Both connectors have a vertical angle and a pin grid of 0.050 inches. The manufacturer part numbers are Samtec SFM-105-02-S-D-A for the Power and Communications Connector and Samtec SFML-110-T2-S-D-A for the Sensor Connector.

DC Power Requirements
The typical input voltage is +5V with a maximum of +0.25V. Line/Load Regulation is 1.0% rms. Average power consumption for the rainbow SET® is 350 mW, with a maximum of 500W, while the Masimo SET® consumes less than 150 mW.

Serial Interface
The default baud rate for the serial interface is 9600 bps, which is configurable up to a maximum of 115200 bps.

Additional Information
The document includes a caution that the device is restricted to sale by or on the order of a physician, with further prescribing information available in the instructions for use. Contact information for Masimo International and Masimo U.S. is provided for further inquiries.