*mymedicalexpo

Pronto

Product catalog summary

Overview: The Pronto® Pulse CO-Oximeter® is a noninvasive device designed for spot-checking total haemoglobin (SpHb®) measurements, oxygen saturation (SpO2), perfusion index (PI), and pulse rate (PR). It features Masimo SET® technology for enhanced performance in motion and low perfusion conditions.

Key Features:

Next Generation SpHb Technology: Provides results in as few as 30 seconds with improved motion tolerance and performance in the 6 to 11 g/dL range. Includes gender selection for accurate haemoglobin range assessment.
Universal Sensor: The rainbow® DCI®-mini sensor is suitable for patients weighing ≥ 3 kg.

Physical Characteristics:

Dimensions: 17.5 cm x 7.6 cm x 3.6 cm (6.9” x 3.0” x 1.4”)
Weight: 368 g (13 oz) with batteries
Audible Alerts: Low battery and system failure

Electrical Specifications:

Battery: 4 AA Alkaline, operating up to 8 hours continuously
Spot-checks: Up to 140 on a fully charged battery

Accuracy:

SpO2 Accuracy: 70–100% range, with 2% accuracy in no motion and low perfusion, 3% in motion conditions
Pulse Rate Accuracy: 25–240 bpm range, with 3 bpm accuracy in no motion and low perfusion, 5 bpm in motion conditions
SpHb Accuracy: 8–17 g/dL range, with 1 g/dL accuracy in no motion conditions

Environmental and Compliance:

Operating Temperature: 5–40°C (41–104°F)
Atmospheric Pressure: 500–1,060 mbar
Compliance: Meets EMC standards EN60601-1-2, Class B, and safety standards UL 60601-1, CSA C22.2 No. 601.1, IEC/EN 60601-1

Sensor Specifications:

Weight Range: Suitable for adults/paediatrics >10 kg and infants 3–10 kg
Compatibility: For use with devices containing Masimo rainbow SET™ technology (v7.4 or higher)

Ordering Information: Sensors are non-sterile, packaged one per box, and do not contain natural rubber latex. Part numbers are 3797 for 200 spot-checks and 3798 for 400 spot-checks.

Usage Note: SpHb monitoring with Pronto is not intended to replace laboratory blood testing. Blood samples should be analyzed by laboratory instruments before clinical decision-making.

Catalog excerpts

Pronto Pulse CO-Oximeter ® Featuring Masimo SET® Measure-through Motion and Low Perfusion™ Pulse Oximetry with rainbow® Technology for Noninvasive Spot-Checking of Total Haemoglobin (SpHb®) Oxygen Saturation Pulse Rate rainbow® DCI®-mini A universal sensor for patients ≥ 3 kg Perfusion Index Total Haemoglobin Next Generation SpHb Improvements The Next Generation SpHb technology1 in Pronto offers: Improved motion tolerance Enhanced SpHb field performance in the range of 6 to 11 g/dL Results displayed in as few as 30 seconds Gender Selection, accounting for the different average haemoglobin ranges of men a

Open the catalog to page 1

More Than a Conventional Pulse Oximeter SpO2 — The amount of oxyhaemoglobin expressed as a percentage of the haemoglobin that is available to transport oxygen Pronto Pulse CO-Oximeter © 2016 Masimo. All rights reserved. Conventional Pulse Oximeter Masimo SET® Measure-through Motion and Low Perfusion PI — Ratio of the pulsatile blood flow to the non-pulsatile blood in peripheral tissue SpHb — Total haemoglobin in arterial blood Universal rainbow® DCI-mini Sensor > Lightweight, versatile sensor, for use with multiple patient types > Features Next Generation SpHb technology when used with Pronto,...

Open the catalog to page 2

Pronto

Pronto

Catalog excerpts

All Masimo catalogs and technical brochures

Archived catalogs