"Same great sensor, but perfected for specific applications" MaxBlend Family Flow Diverter Standard Flow Diverter • Works with all Max-250 Accessories • Works with the MaxBlend Family of Products • Flow Diverter will not fit in MaxBlend Family (MaxBlend 2, MaxBlend Lite, BlenderBuddy 2) • Flow Diverter will not fit in standard Max-250 accessories PART NUMBERS The MaxBlend Family of products are equipped with a bleed-control, FOR MAXBLEND FAMILY: Max-550E, MaxBlend . . . . R140P02-001 Flow Diverter, MaxBlend . . R228P41-001 which allows the user to provide better accuracy and waste less gas. Blenders require a minimum flow to be accurate. By adjusting the toggle to the appropriate position, the user will allow the gas to flow properly through the blender which minimizes wasted gas to 0.1 LPM when closed. Because of this, we had to fine-tune our Max-550E sensor to FOR ANALYZER FAMILY: Max-550E, Analyzer . . . . . . . . . R140P02 Flow Diverter, Analyzer . . . R110P10-001 accurately sample the gas with such small traces of gas. In Summary - We needed to create a flow-diverter that can take an accurate reading with such a small bleed (less wasted gas).