FEEDBACK Control Technology Fully Automated Monitoring www.mcqinst.com [email protected] Thanks to our Feedback Control Technology, you will be able now to modify the percentages of single components of a gas mixture which flows inside a chamber/bioreactor/incubator, with a feedback in a closed loop control, in an automated way. The Feedback Control could be provided by an Analyzer at the end of the process that measures the atmosphere inside the chamber or it could be provided by a Sensor inside the chamber/bioreactor/incubator. Benefits Our full AUTOMATION of the processes will allow you a continuous monitoring, with everything it implies: costs saving, effciency, lesser chance of errors, continuous process monitoring, big time saving of the experiment, automation, and much more. The Chamber/Bioreactor/Incubator may contain cell cultures or must or anything else that can be employed in life science, biotechnologies, pharmaceutical or studying food and beverages or much more. It is a completely NEW solution on the market ready for your laboratory. CHAMBER / BIOREACTOR / INCUBATOR

Gas mixer + Bioreactor + Analyzer This is the case in where our Gas Mixer injects the gas mixture inside a Bioreactor. Then the Analyzer can read the result and our instrument is now able to check if the result is optimal, so it means anything changes. But if any parameter varies in a negative condition for your needs, a signal is sent with a Digital Feedback Control to the Gas Mixer which adapts itself changing the percentages of the components of the gas mixture in an absolutely automated way. A SAMPLE OF FEEDBACK IN A LOOP CIRCUIT: Send Signal to Adjust Mixture Check Mixture The analyzer will...