ER214
2Pages

{{requestButtons}}

Catalog excerpts

ER214 - 1

benefits obtained by reprocessing Leak Test performed by the machine during the entire cycle automatically. It guarantees a positive continuous pressure inside the endoscopes avoiding infiltrations. Validated to remove microbial biofilm Detergent savings by the automatic adjustable dose. It prevents waste or overdose that could damage scopes. Full Traceability through barcode reader that identifies the operator and the instrument. Consequently, together with the printings of the single stages of the process, it is possible to track all phases until the final result. Alternatively you can send data to pcs via Bluetooth. Time savings allow the operator to perform other tasks inside the cleaning room. In the meantime the device executes the pre-washing of endoscopes automatically. Lowering of biological risks especially Carpal Tunnel syndrome. UNI EN ISO 15883-5:2006 and NF EN 12353:2013 certified technical data Main Characteristics ER-214® helps the operator step by step during all the phases through graphic messages on the display. The device performs this operations automatically: Leak test is performed during all the washing cycle in order to reduce risks of instrument infiltrations. Automatic detergent dosage thanks to the diaphragm pump, it dosages the right quantity of detergent reducing risks of waste and over dosages damaging for the instrument. Made of food-grade ABS and stainless Steel 316L. Other components made of materials resistant to aggressive chemical detergents. Outside dimensions (WxDxH) 470x300x250 mm Weight 10 kg Certification Class I, according with all.VI Dir. 93/42/EEC and EN 61010-1, EN 61010-2-040, EN 61326-1, EN ISO 14971 automatic system to support the manual washing steps of flexible endoscopes Automatic flushing and rinsing of endoscope channels with no reusable product, this avoid the recycling of water used for the cleaning, preventing risks of contamination. Organic residual sample it is possible to take a sample of water to quickly carry out organic residual tests. Full traceability through paper report or saving data to USB. Data transfer between Bluetooth and Pcs. Practical and fast use through barcode (or manual controls). ER-214 cleans the instrument in a fast and safe way automatically. The operator just need to clean scopes outside. Killing protein inside the endoscope channels according with UNI EN ISO 15883-5, NF EN 12353:2013. The process was validated through tests carried out by certified laboratories in Italy and by Biotech-Germande (France), in order to remove microbial film. MEDICAL DEVICES GROUP Srl Via G.Fracastoro, 1 48124 Ravenna (RA) Tel +39 0544 1826013 - Fax +39 0544 1826015 www.mdg-srl.com - info@mdg-srl.com Complies with the Directive 93/42/CEE Annex VII

Open the catalog to page 1
ER214 - 2

AUXILIARY INSTRUMENT CONNECTION OPTIONAL RESET-STOP-START BUTTON COLOR DISPLAY Clean-up counter for endoscopy suitable for the automated Accessories: Connection control with ER-214® kit for each brand. Storz, Fujinon, Olympus and Pentax The clean-up counter, connected to ER-214®, permits the automatic load and discharge of water and chemical detergent necessary for the correct cleaning of endoscopes channels. This process allows to avoid recycling of liquids or rather the contamination of all devices. • The unit is completely made of stainless steel, designed to optimize ergonomics in...

Open the catalog to page 2

All MDG Engineering srl catalogs and technical brochures

  1. AC-217

    2 Pages

  2. DRS-218

    2 Pages

  3. LT-217®

    2 Pages

  4. FRA

    2 Pages

  5. DEA®

    2 Pages

  6. EBAG®

    2 Pages

  7. ER-214®

    2 Pages

  8. DRS-215®

    2 Pages

  9. EC-216®

    2 Pages

  10. LV-215®

    2 Pages

  11. Flyer-E-BAG

    2 Pages

  12. LV216

    2 Pages

  13. DRS215

    2 Pages

  14. EC216

    2 Pages