General Cagalogue Endoscope Prewash Systems
20Pages

ENDOSCOPY LINE PRE-WASHING SYSTEMS FOR FLEXIBLE ENDOSCOPES AND TEE PROBES

MEDICAL DEVICES GROUP® . HEALTH CARE SINCE 2008 MDG Engineering was founded in 2019 as production division of the MDG S.r.l. group, established in 2008. This group represents a solid and proven excellence in the field of medical devices, especially in technologies applied to digestive endoscopy. An industry leader in the design of machines dedicated to digestive endoscopy, with over 30 years of experience in the field.

Currently, MDG S.r.l. operates from its headquarters in Mezzano, on an area of 5.000 square meters which includes technical/administrative offices, warehouses and over 2.500 square meters dedicated to the production of our devices. We aim to start new projects while continuing to expand our production capacity. MDG S.r.l. group is led by Andrea Fabbri, an internationally renowned designer of medical devices for endoscopy reprocessing. Through its expertise and strategic vision, he has contributed to the development of innovative solutions that improve the quality of medical procedures while...

CUSTOMIZATION AT THE SERVICE OF CUSTOMERS Flexibility and the ability to find solutions to satisfy every necessity MDG Engineering is a well-established brand in the medical industry, specializing in the production of infection management solutions in endoscopy, with a catalog that includes devices designed for the prewashing of flexible endoscopes and TEE probes. Present worldwide in many Countries , MDG has partecipated to the preparation of renowned healthcare facilities and counts among its customers high-level research laboratoires and established companies that operate in the medical...

TESTER TO CHECK INTEGRITY OF FLEXIBLE ENDOSCOPES For all types of flexible endoscopes. MDG patent LT-217 is a patented system designed to check the integrity of flexible endoscopes. Through its patented system, the device accurately detects leaks of sheaths and endoscope channels (including perforations caused by twists of biopsy channels) and allows precise monitoring of o-rings wear conditions. This leak tester works through much higher standards compared to the other products currently on the market, drastically reducing infiltrations during endoscope reprocessing procedures. It is also...

TECHNICAL SPECIFICATIONS IDENTIFICATION LT-217 is able to automatically identify the type of instrument connected. Connectors available to connect instruments of every type, brand and model. BARCODE READER Integrated barcode reader for instrument and operator ID identification (only available in the LT-217B version). Equipped with backlit LCD display. COMPLETE TRACEABILITY WORK CYCLES Possibility to download data through the integrated USB port. The device features 5 different preset programs to adapt to every instrument and test. Depth Height Weight gr.

AUTOMATIC SYSTEM DESIGNED TO SUPPORT THE PRE-WASHING STEPS OF FLEXIBLE ENDOSCOPES Compliant with EN ISO 15883-5 ANNEX F ER-221 is a class I medical device designed to support health care staff members during endoscopes pre-washing steps, while ensuring complete traceability and automation of the process. This device helps operators save time and eliminates the need for repetitive manual procedures, which carry the risk of errors that can cause inflammations and osteoarticular diseases. ER-221 is available in 4 different models, to adapt to instruments of every type and dimension, to be...

TECHNICAL SPECIFICATIONS INTEGRITY TEST WIDE DISPLAY At the start of the washing cycle, this device performs a test to check the integrity of the endoscope in a dual mode (negative and positive pressure) and then maintaining the positive pressure inside it throughout the entire cycle, and thus preventing the possibility of instrument infiltration. MDG patented system. Through its wide 7” HD touch screen display, ER-221 helps the operator during all pre-washing phases, guiding him step by step via graphic messages on the display. AUTOMATIC DOSAGE Thanks to the internal pump, this device is...

PRE-WASHING SYSTEMS AUTOMATED THROUGH ER-221 Compliant with EN ISO 15883-5 ANNEX F In order to complete the pre-washing process we designed the endoscope sink LV-222, which comes equipped with the ER-221 system built-in. This complete system, entirely made in stainless steel, is able to manage the endoscopes’ channels reprocessing, by automatically filling and draining the water and by dosing the chemical product needed in each pre-washing phase. This process prevents to avoid recirculation of used liquids and, consequently, self-contamination of the equipment itself. It is possible to...

TECHNICAL SPECIFICATIONS INTEGRITY TEST WORK SURFACE At the start of the washing cycle, this device performs a test to check the integrity of the endoscope in a dual mode (negative and positive pressure) and then maintaining the positive pressure inside it throughout the entire cycle, and thus preventing the possibility of instrument infiltration. MDG patented system. In the standard version, the work surface is composed of a basin dedicated to the dilution of chemical products and a washing basin complete of mixer and optional water or compressed air gun. Through its wide 7” HD touch...

AUTOMATIC SYSTEM DESIGNED TO SUPPORT THE PRE-WASHING STEPS OF FLEXIBLE ENDOSCOPES Compliant with EN ISO 15883-5 ANNEX F ER-214 is a compact system that works in combination with the instruments’ pre-washing sink to support the operator throughout all the reprocessing steps. The device ensures the complete traceability and automation of the washing process, and It can be located upon the sink or mounted on the wall using a specific wall bracket. The versatility of this device allows for automatic management of water filling and draining, as well as the dosing of the chemical product,...

TECHNICAL SPECIFICATIONS LEAK TEST AUTOMATIC DOSAGE At the start and during the entire washing cycle, this device performs a double-controlled leak test to prevent the possibility of instrument infiltration. Thanks to the internal pump, this device is able to automatically dose the right quantity of concentrated detergent to be diluted in the basin, avoiding risks of waste and overdosage. Automatic flushing and rinsing of the endoscopes’ channels in immersion with recirculation of the washing solution or in ‘single-use’ mode, preventing the reuse of the used washing solution inside the...