Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. MDG Engineering
  3. HWS-Line
video corpo

HWS-Line

HWS-Line
1 / 2 PagesView full catalog

HWS-Line

Product catalog summary
Overview: The HWS-Line™ is a series of operating room scrub sinks designed by MDG Engineering, featuring automatic taps and dispensers for soap and disinfectant. These sinks are crafted from 15/10 stainless steel to ensure high hygiene standards and infection prevention in surgical environments.
Specifications: The sinks are equipped with electronic mixer taps that use infrared sensors for activation, ensuring no direct contact and minimizing cross-contamination risks. They feature a self-closing mechanism after 60 seconds of continuous flow and a self-opening function every 24 hours to prevent water stagnation and protect against Legionella.
Models and Dimensions: The HWS-Line™ sinks are available in three sizes: 70 cm, 140 cm, and 210 cm in width, with varying numbers of electronic taps and dispensers. The models range from HWS-70 with one tap to HWS-210 D4 with three taps, two soap dispensers, and two disinfectant dispensers.
Installation and Usage: The sinks are wall-mounted at a height of 90 cm, providing a hands-free solution with automatic dispensers for both soap and disinfectants, ensuring safety and cleanliness in medical settings.
Key Features: The design emphasizes hygiene and safety, with cutting-edge technology to prevent cross-contamination and ensure a safe environment for medical staff. The sinks are suitable for hospitals and ambulatory surgery centers, offering efficiency and comfort.
See more

Catalog excerpts

HWS-Line-1

Electronic mixer with infrared sensor with activation on presence detection with side mixing lever to adjust the temperature. Self-closing after 60 seconds of continuous flow. Self-opening every 24h after the last use to avoid stagnation. Medical Devices Group S.r.l. Carraia Baruzzi, 4/M - 48123 Mezzano - Ravenna (Italy) Tel +39 0544 1826013 Fax +39 0544 1826015 www.mdg-engineering.com - www.mdg-srl.com [email protected] Operating room scrub sinks with automatic taps and dispenser for soap and disinfectant High security in hygiene and cleanliness

 Open the catalog to page 1
HWS-Line-2

MDG Engineering sinks are available in three different dimensions: 70, 140 and 210 cm wide, with one, two or three automatic stations, the right fit for any hospital or ambulatory surgery center by ensuring efficiency and comfort. HWS-Line™operating room scrub sinks with automatic taps and dispenser for soap and disinfectant Dimensions N. electronic N. soap N. disinfectant (cm WxDxH) taps dispensers dispensers Hygiene is fundamental for all operating rooms and not only. Designed and manufactured by MDG Engineering, the HWS-Line™ offers sinks made from 15/10 stainless steel, created for safety...

 Open the catalog to page 2

All MDG Engineering catalogs and technical brochures

  1. AC-217 Trolley designed for long-term care facilities
    AC-217 Trolley designed for long-term care facilities

    2  Pages

  2. DRS-222
    DRS-222

    2  Pages

  3. DRS-215
    DRS-215

    2  Pages

  4. E-Bag
    E-Bag

    2  Pages

  5. LT-217
    LT-217

    2  Pages

  6. DRS-221
    DRS-221

    2  Pages

  7. EC-216
    EC-216

    2  Pages

  8. STA-P
    STA-P

    2  Pages

  9. DRS-OT10
    DRS-OT10

    2  Pages

  10. ER-214
    ER-214

    2  Pages

  11. AES-CERBERUS
    AES-CERBERUS

    2  Pages

  12. General Cagalogue Endoscope Prewash Systems
    General Cagalogue Endoscope Prewash Systems

    20  Pages

  13. General Catalogue Endoscope Drying Cabinets
    General Catalogue Endoscope Drying Cabinets

    16  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.