Liposuction & Lipofilling Cannulas 15 models covering the whole procedure: body aspiration, fat harvesting, tumescent infiltration and reinjection. Every article code describes the geometry of the cannula. ■ Body aspiration · ■ Harvesting, microcannula, infiltration · ■ Fat reinjection · Body Aspiration Closed ogival-tip tube with a single side slot Code : LP[xx][yyy]RO01S[V] OD: 3,0 – 4,0 – 5,0 Length : 150 – 250 – 300 mm Conservative one-direction aspiration for finishing and superficial areas. One oval side slot Three radial ports Code : LP[xx][yyy]RO03R[V] OD: 3,0 – 4,0 – 5,0 Length : 150 – 220 - 250 – 300- 350 mm All-direction aspiration for medium to high volumes; best-selling, moderately aggressive. Three slots at 120 Double three-port Code : LP[xx][yyy]RO06K[V] OD: 3,0 – 4,0 – 5,0 Length : 220 – 300 - 320 - 350 mm High-volume extraction and fibrous tissue (back, male patients, revisions). Two rings of three 120° slots offset by 60. Double helix, six ports LP[xx][yyy]RO06H[V] OD: 3,0 – 4,0 – 5,0 Length : 220 - 300-320 - 360 mm Even 360° aspiration, gentler per port; suited to powered handpieces. Six short slots on a helix, 60° apart. Basket disruptor Code : LP[xx][yyy]RO04Q[V] OD: 3,0 – 4,0 – 5,0 Length : 250 - 300- 360 mm Breaks up fibrous fat before or during aspiration; for revisions and fibrous areas. Cage tip with four 90° windows. M.D.L.

Fast harvesting of fine-grained microfat for nanofat or fine-needle injection. 12 or 20 round ports, 0 0.9-1.2 mm, in four rows at 90°, 60° bevel with raised tooth, pitch 3.5-4.5 mm. Beveled micro multiport Code : LP[xx][yyy]RH12R[V] Gentle microfat harvesting with less tissue trauma. 12 smooth ports, 0 0.9-1.1 mm, outer bevel, three staggered rows at 120°, pitch 4-4.5 mm. Six-port speed harvester Code : LP[xx][yyy]RO06D[V] Maximum tissue volume in minimum time, for breast and buttock procedures. Six slots in two opposite staggered rows, 1.2 x 4 to 1.8 x 6 mm, pitch 7-9 mm Spiral harvester ex...