Overview

This document provides detailed specifications and compatibility information for a range of reusable temperature probes used in medical monitoring devices. These probes are designed for various patient types (adult, pediatric) and measurement sites (skin surface, rectal, esophageal).

Probe Types and Designations

• Type A: Adult reusable skin-surface probes
• Type B: Adult reusable esophageal/rectal probes
• Type C: Pediatric reusable skin-surface probes
• Type D: Pediatric reusable esophageal/rectal probes

Key Specifications

• Length: Typically 10 ft (3.0 m), with some variants at 13 ft (4.0 m)
• Resistance at 25 °C: Common values include 2.252 KΩ, 10 KΩ, 6.867 KΩ, and 2.016 KΩ depending on probe type and compatibility
• Accuracy: High precision ±0.1 °C with quick response and high signal-to-noise ratio

Compatibility and OEM Models

The probes are compatible with multiple OEM brands and models, including but not limited to:

• Drager (Infinity Delta, Gamma, Kappa, Vista)
• Creative (China)
• Air Shields, Artema/S&W (Denmark)
• Comen (China)
• Mindray (China)
• Philips
• Edan (China)
• Spacelabs
• YSI 400 series
• Dallas 18B20 series

Each compatible brand has specific order codes (e.g., W0008A, W0008B, W0008C, W0008D) corresponding to probe types and specifications.

Product Advantages

• High precision temperature measurement with ±0.1 °C accuracy
• Quick response time for real-time monitoring
• High performance noise ratio ensuring signal clarity
• Full compatibility with OEM technologies for seamless integration
• Reusable design for cost-effectiveness and sustainability

Ordering and Identification

Probes are identified by OEM order codes and price codes, which correspond to specific probe types, lengths, resistance values, and compatible monitor models. For example:

• W0008 series for Drager compatible probes
• W0010 series for Air Shields compatible probes
• W0112 series for Passport V and Edan compatible probes
• W0001 series for YSI 400 series compatible probes

Summary Table Highlights

Recommendations and Best Practices

• Use probes according to specified patient type and measurement site to ensure accuracy.
• Verify compatibility with the monitoring device model before ordering.
• Maintain probes properly to preserve reusability and measurement precision.
• Refer to OEM order codes for precise identification and procurement.

Contact and Support

For further information or marketing inquiries, contact: [email protected]

Website: www.med-linket.com