Mini Crosser M Joy
16Pages

Quick guide

Introduction Congratulations on your new Mini Crosser M Joy electric mobility scooter. You have now taken possession of an electric mobility scooter developed for outdoor driving by active users. It is what is called a Class C vehicle in accordance with the European classication of electric scooters. For optimum enjoyment of this vehicle - and to avoid breakdowns and accidents - we recommend that you read the User Manual carefully. As a new user, you should pay particular attention to the section entitled “Driving the Mini Crosser M Joy”. Note: This Quick Guide is to be regarded as a...

Designations The following designations refers to the explanation later in the instruction book. Control panel Joystick Headrest (not shown) (Extra) Charging socket Handbrake Finger screw Release handle forw. / backw. Seat rotation Indicator lights Eye for restraints Thermal fuse Serial number on vehicle. Disengagement lever

Start/stop button (push button) Start/stop button Start/stop button (toggle switch) Select program Gear down/up Display for seat functions (not available) Display for seat functions (not available) Battery indicator Battery indicator Magnetic lock Magnetic lock Lights, hazard warning lights and indicators Light, hazard warning lights and indicators Indicator left/lights Select seat function (toggle switch) (not available) Indicator right/hazard warning lights. Note: The battery indicator should show red, amber and green. If only red and amber are showing, the batteries should be charged as...

Speed selection with G90T Speed selection with G90A To start the scooter: Press button 1A or use toggle switch 1B Wait for the battery indicator to stabilise (3-5 seconds) To start the scooter: Press button 1 and wait for the battery indicator to stabilise (3-5 seconds) Select the maximum speed: Keep pressing button 3 or toggle switch 10 to change the numbers between 1, 2, 3, 4 and 5. 1 is the lowest speed and 5 is the highest. (This may vary. Some scooters have a maximum speed of 3). Select the maximum speed: Keep pressing button 3 to change the numbers between 1, 2, 3, 4 and 5 on the...

General care and maintenance A Mini Crosser M Joy does not require much maintenance. It should be kept in a generally good condition, however. The following should be checked regularly: • Tyre pressure (if pneumatic tyres are tted) Tyre wear Keep the control panel, the charging socket and the electronics box under the seat dry. Battery charging Never wash the Mini Crosser with a high-pressure cleaner or direct water jet! This could damage the Mini Crosser’s electronics. To keep the Mini Crosser in good condition safety-wise, we recommend the following regular checks: Daily: • Test the...

Plug the cable into the control box on the scooter Plug the charger into the outlet or switch it on Use the indicator lights on the charger to check that charging has started. When charging has nished, switch off or unplug the charger, and then remove the charger cable from the control box. You are recommended to charge the batteries every night after you have used the scooter. (Further information in the User Manual) Note: If the batteries are damaged or are leaking, you should avoid touching them because you may burn yourself. Contact a quali ed workshop immediately! Old batteries must be...

Safety check See the User Manual Status light ashes with 2 ashes per cycle and the scooter runs at half speed. The scooter may be tted with a speed limiter that halves the speed when the seat is raised. This is not a fault. Status light ashes with 7 ashes per cycle The batteries need charging. The scooter runs at half speed or not at all If the cause is not a raised seat, this may be a serious fault. Contact a competent service engineer as soon as possible (HMC or therapist). Note: Mobile phones should not be used very close to the scooter as they generate electromagnetic elds that may...

Serial number All scooters have a serial number plate showing the year of production, month and serial number. The same serial number can also be found on the front of the User Manual. Please quote the serial number when making inquiries about servicing, spare parts, etc. Driving the Mini Crosser M Joy Getting in and out It is important to learn a safe technique for getting in and out of the Mini Crosser. In general the following method should be followed: • Make sure that the Mini Crosser M Joy is off (switch turned to 0) Make sure that the brake is on. (Lever for disengaging motor in top...

General safety advice • Make sure that the backrest is upright and the seat is as low as possible. Positioning belts are recommended if the user is unable to maintain a good driving posture independently. Adjust your driving to road conditions. Take account of light, trafc and weather. Be particularly careful when driving in the dark or in bad weather, such as rain or snow. Avoid driving on gradients with poor surfaces, such as: snow, ice, newmown grass, wet grass and wet leaves. Never drive when under the inuence. This applies not only to alcohol, but also to drugs and medicines. Reduce...

When driving in trafc... Be particularly aware of the following when driving in trafc: • The Mini Crosser M Joy is a low vehicle and not always easy for other road users to see. Make quite sure that other road users have seen you before driving onto the highway. Keep an eye on trafc behind you. Keep well over to the side of the road when driving on busy roads. Turning right and left at crossroads. Be aware of cyclists and pedestrians. Follow the rules of the road for cyclists. How quickly things are happening. How long do the lights stay green? How quickly are cars approaching? etc.

Braking systems There are three braking systems on the Mini Crosser: • Motor brake - adjusts vehicle speed also when going downhill. Magnetic brake - the magnetic brake is automatic and engages when the Mini Crosser stops. In an emergency, the Mini Crosser can be stopped instantaneously by turning of the joystick. Please note that this will cause very sharp braking. The rear wheels will lock. Must NOT be used in the normal course of driving. The brake must never be disengaged mechanically using the disengagement lever on a slope. This function is only designed for use when pushing the Mini...