MEDEN INMED e-mail: [email protected] Melting and mixing fango mass device Dostepny tylko online Stan: Nowy A device for melting and mixing paraffin mass. Petny opis produktu Product features: • consists of a tank for fangoparaffin mass with a cover • heating elements under its bottom and on its side wall • structure rests on a supporting frame with two legs fitted to the working table • mixer equipped with an automatic mixing arm which is started every few minutes to maintain even temperature of the mass in the container and protects the mass from delaminating • heated drain valve of the mixer, which prevents the mass from congealing • mixing arm drive is stopped automatically when the cover is lifted • corrosion-resistant steel elements (easy to clean) • housing made from rolled stainless steel sheet • working parameters presented on large display placed on portable panel • electronic controller enables programming of the following functions: Heating: normal operation in temperature from 55 to 80° C Mixing: forced mass mixing (accelerated heating process of added cold mass) Sterilization of the mass within a defined temperature range Start in: delayed operation after a programmed number of hours Technical data: Working volume of container: 40 I • Foil lengh lOOOmb, width 65cm • Foil for APS 10 rolls (roll: lengh 50 cm, width 50 cm) • Interlining 2 rolls, each lengh 200mb, width 50cm • Warming Copresses filled with paraffin 360 x 280 mm (10 units) • Foil hanger • Double hanger: foil+interlining • Foil knife • stand for additional traces

Watch product presentation: