DECAPsmart Plus performs therapies of CO2 removal simple or associated with hemofiltration in total safety. The characteristics of the system allow treatments lasting up to 5 days without any replacement or modification of the disposable kit in both therapeutic approaches. DECAPsmart Plus allows blood flows varying between 30 and 450 ml / min and when used in ECCO2R+HF to infuse liquids in post-dilution up to 6 liter / h; in this treatment the clever use of a modular clamp allows the management of a weight loss between 10 and 1000 gr/h. The interface is simple and intuitive , based on a color well organized display, a thumbwheel and 3 buttons. KIT ECCO2R • complete set of lines marked with color codes to perform a safe and quick assembly • an oxigenator made of Polymethylpentene KIT ECCO2R+HF • set of lines marked with color codes to perform a safe and quick assembly • an oxigenator made of Polymethylpentene • an hemofilter 1.2 sqm

Available Treatments ECCO2R and ECCO2R+HF are minimally invasive techniques due to the small blood flow that rarely exceeds 350 ml / min, using temporary vascular access for dialysis shunt. The removal of CO2 takes place thanks to an oxygenator. In the treatment of ECCO2R +HF the hemofilter located upstream of the oxygenator allows an adequate renal support if there is an organ failure in addition to optimizing the process of removing carbon dioxide with the oxygenator. ELECTRICAL DATA TECHNICAL DATA Power supply Variable from 5 to 450 ml / min - resolution 5 ml / min Varying from 600 to 3000...