BONE TRUST ® IMPLANT SYSTEMS
1 / 60Pages

BONE TRUST® IMPLANT SYSTEMS PROSTHETIC MANUAL

PROSTHETIC MANUAL

GENERAL INFORMATION ABOUT IMPLANT PROSTHETICS REGULAR CHECKS OF THE SUPERSTRUCTURES Nowadays, implant prosthetics are an indispensable part of modern dentistry. Whether the replacement of a single tooth or the treatment of partially or even fully edentulous jaws and thus very complex restorations – the individual expectations and demands by users and patients are continually increasing. The objective is always the restoration of aesthetic, functional and phonetic functions. New technologies, materials and also specialisations require close collaboration and an exchange of information...

BONETRUST® PLUS Through the crestal bevelling of the implant body which is accompanied by an optimizeddiameter connection design of the prosthetic components, a harmonised platform switching for long-term stable bone preservation is realised. An internal cone with torx or a precision hexagon socket are optionally available for the BoneTrust® plus implants as an anti-rotational mechanism. 11° cone angle combined with precision torx Hexagon socket Integrated platform switching in the case of the BoneTrust® plus hex and cone implants COLOUR CODING Starting with the healing screw, all...

BONETRUST® PLUS GOOD TO KNOW! The BoneTrust® plus hex and plus cone implants are each available in the diameters 3.0/3.4/4.0 and 5.0 mm. However, the internal connection and prosthetic platform differ in the hex and cone variants. The hexagon socket in the BoneTrust® plus hex implants 3.4/4.0/5.0 is the same size. The hexagon socket of the 3.0 mm implant is smaller. In the case of the prosthetic platform, there are three sizes: 3.0 is smaller, 3.4 and 4.0 are equally large and 5.0 mm is larger. For this reason, some prosthetic elements (for example, the „Lucky Lock“ Abutment or the CAD/CAM...

BONETRUST® PLUS Esthetic Abutment Ceramic Base INDICATION Single tooth restoration, cemented Single tooth restoration, occlusally screwed Bridge restoration, cemented Bridge restoration, occlusally screwed Hybrid constructions Temporary restoration single tooth Temporary restoration, splinted Bar restoration Occlusally screwed hybrid prosthesis Telescopic restoration Prosthesis fixation PROSTHETIC MANUAL » PROSTHETIC GUIDELINE BONETRUST® PLUS Wide Body Abutment UCLA Abutment Hex/Torx UCLA Abutment Classic

BONETRUST® PLUS CAD/ Telescopic CAM Abutment Ti-Base for Cerec® Seating Coping Ti-UCLA-Base Including ot Screw Direct Abutment Aurobase Direct Direct Ti-Base Direct Impression Coping OT/RT „Lucky Lock“ Abutment

BONETRUST® PLUS Gingiva former differences The standard gingiva formers are available in height of 1.5/3.0/5.0/7.0 mm. The emergence profile of the BoneTrust® plus standard gingiva former precisely matches the anatomical shape and emergence profile of the Esthetic Abutments, depending on the respective gingival height. 5.0 mm Labelling of the BoneTrust® plus gingiva former Implant diameter Gingival height Implant internal connection H (hex) or C (cone) PROSTHETIC MANUAL » GINGIVA FORMER BONETRUST® P

BONETRUST® PLUS „SCHWEIZ“ GINGIVA FORMER The „Schweiz“ model has four strategically positioned holes f or suturing the mucosa higher up on the gingiva former. Available in the gingival heights 3.0 and 5.0 mm. Can be used for the implants 3.4/4.0/5.0 mm. GINGIVA FORMER WIDE BODY The emergence profile of the BoneTrust® Wide Body gingiva former precisely matches the anatomical shape and the emergence profile of the Wide Body Abutments. Available for BoneTrust® plus hex or cone and the implants 3.4/4.0/5.0 mm. Choose from the gingival heights 3.0 and 5.0 mm. T ALTUS™ GAUGE The Altus gauge...

BONETRUST® PLUS Three versions of the impression posts for the open tray technique are available. A standard version with short or long screw and additionally an XL version with a long screw – to be used in the case of thicker gingiva. The OT retaining screws are screwed through the actual impression posts and for this reason, they cannot become loose. As a result, the component can be easily and securely fastened with only two fingers or a screwdriver. ** * Impression posts OT with fixation screw, short ** Impression posts OT with fixation screw, long *** Impression posts OT (XL version)...

BONETRUST® PLUS TIP: To simply the workflow and save time, it is recommended to send the dental laboratory the corresponding laboratory analogue at the same time. TIP: The perforation made in the impression tray can be gently sealed with wax prior to taking the impression. The retaining screw of the impression post is pressed through the wax and is easier to locate. In addition, no impression material will run out of the tray uncontrolled as a result and this makes neater work possible. BONETRUST® PLUS LABORATORY ANALOGUES ◄ hex 3.0 mm Article no.: 185-030000 hex 3.4 mm Article no.:...

BONETRUST® PLUS IMPRESSION REPOSITION TECHNIQUE BONETRUST The impression posts for the repositioning technique are available in two lengths. The enclosed, precision-machined transfer cap can be felt and heard clicking into place and this allows for secure and precise repositioning in the impression. The transfer abutment is provided with a standard retaining screw and transfer cap. When inserting the transfer cap, it should be ensured that the lugs of the cap point towards the flat sides of the impression post. During later repositioning of the long impression post in the impression, it...

BONETRUST® PLUS TIP FOR STEP 8: After releasing the impression post from the implant, it can be screwed in immediately at the chair with the laboratory analogue and put back into the impression in order to directly verify correct positioning.

BONETRUST® PLUS IMPLANT ADAPTER (TEMPORARY ABUTMENT) For secure insertion, all BoneTrust® plus implants are provided with a colour-coded implant adapter made of titanium which is secured using a standard retaining screw. The implant adapter can also be used for the insertion of temporary crowns. To do this, this should be removed after exact positioning of the implants and ground down outside of the mouth. The customising aid is recommended for a secure hold during grinding (page 17). Afterwards, the implant adapter can be covered with Opaker and once again screwed in with the implant. A...