MMSlog® MODULAR SHELVING MMSlog® MODULAR SHELVING WITH STANDARD DIMENSIONS IN COMPLIANCE WITH ISO3394/HTM71 • The structure is made of three tubular elements or folded epoxy coated steel sheet • Side frames (a). • Upper/ lower connectors for side frames (b). • Back diagonal tensioner to stabilize & strengthen the structure (c). • Modular shelving rack with standard dimensions according to ISO 3394. • Strong design, load-resistant, minimalistic & functional. • Frame made from 30*30*2 mm tubes and connectors/ tensioners from 3 mm-thick folded steel sheet. • Light-grey Epoxy coated steel sheet. • Frames fitted with holes to install the guide-rails every 75 mm. • 2 adjustable leveling legs on the lower part of the frames (with a single wrench). • The connector & stabilizer set allow the union of frames and give strength to the whole strucuture. • Side frames equiped with 10 pairs of ABS guide rails to allow trays/ baskets gliding (d). • No tool required to clip the terminals “L” & “R” to the guide rails. • On the central & lower levels, the guides are in straight horizontal position, while they can be set in diagonal on the upper levels for easier access to products. Medical Modular System S.A. - C/ Llacuna 110-112 – Local 1 - 08018 – Barcelona Telf. (34) 933.098.593 - Fax (

TECHNICAL FEATURES OF THE MMSlog® MODULAR SHELVING Modular shelving rack to store disposable material using the 600 x 400 mm Kanban management system, in compliance with the ISO 3394 standard (HTM71) Each section has 1 or 2 monobloc structural frames. The frames are made from steel tubes, of 30x30x20 mm, light-grey epoxy coated on the outside. The lower ends of the frames are provided with adjustable legs to level the height using a single wrench. The frames are joined together by a set of 2 connectors and a stabilizer, easy & quick to install. The frames are provided with 10 pairs of ABS gliding...