TERMINAL UNITS PENDANT BRIDGES M-GM FEATURES: Delivery of medical gases, compressed air and vacuum to the patient’s bed Delivery of electricity, low-voltage and audio-video signals For easy installation of patient’s life support devices on shelves, rails and infusions stands Possibility to install in different places, e. g. in front of windows, glass partitions Convenient approach to patient from all sides Easy equipment installation of the suspended shelves and stands Special four-sections anodized aluminum profile 225 x 135 mm, length depends on a project Two railings 10 x 25 mm for additional devices The front and side areas are coated with anodized aluminum or with powder paint in RAL colors Indirect lighting, patient’s zone lighting and night light Medical gas outlets, electric sockets, information signals, medical gas pressure control indicators

Bridge pendant can be assembled with: Sliding shelf module, moving along entire profile length, with rotation around vertical axis, with two shelves 500x400 mm, lower shelve with a drawer Extra rails 10x25x400 mm for suspended devices (fixed on the sliding module) A rotating shelf for a monitor 300x400 mm, adjustable height Sliding I. V. pole for infusion pumps and drips, with standard rail 10x25 mm for suspended equipment Sources of direct light for patient's examination Bedside telescopic screens Flowmeter with oxygen humidifier mounted on a rail or with direct connection Suction system with...

For small operating wards l For anesthesia wards l For intensive therapy wards and resuscitation rooms l For neonatal wards l For emergency rooms l For treatment rooms Bridge pendants can be joined end-to-end to form a continuos module for general resuscitation rooms, intensive therapy wards and others

CONSTRUCTION FEATURES Solid mounting into the ceiling with two support-legs. Possible three options of mounting support-legs to the ceiling: with anchors to the monolithic ceiling slab (1), mounted to the main ceiling through the ceiling slab (2), mounted to the hollow core slab with special inserts (3). Four-section special anodized aluminum profile with two special rails 10x25 mm in front, with line roll bearing though all length of profile for sliding modules Front and end covers are made from aluminum profile and fixed into main profile grooves without any fasteners 3 Profile length for one...