MEDICAL TRIAL PRO 2.0

1 / 3 PagesView full catalog

MEDICAL TRIAL PRO 2.0

Product catalog summary

Minimum Recommended Computer Requirements:

Processor: Intel Core i5
RAM: 8GB
Hard Disk: 1TB
Dedicated Video Card: NVIDIA
Video Resolution: 1920 x 1080
Operating System: Windows 10/11 Pro 64Bit

Technical Specifications:

Resistive Sensor: 16 sensors per cm²
Power Supply: 15 VDC
Current Consumption: 50 mA
XY Resolution: 1.5 DPI
Z Resolution: 8 Bit
Material: Aluminum
Acquisition Frequency: Selectable 5/600 Hz
Interface Type: USB 2.0
Dimensions: 1200 x 550 mm
Weight: 8 Kg
Sensor Thickness: 20 mm
Sensor Lifespan: 1,000,000 cycles
Calibration: 10 Bit Automatic
Maximum Pressure: 150N/cm²
Operating Temperature: 0°C – 55°C
Product Certification: CE

Package Contents:

One Trial Pro 2.0
One 220/15V Transformer
Two passive walkways measuring 60x40 cm each
One USB 2.0 cable with dual ferrite noise filter
One software license included

Connection Procedure:

Place the platform on the ground, ensuring the power connectors are on the patient's left when stepping on it.
Position the two passive walkways at the entry and exit of the platform.
With the power switch off, connect the power and USB 2.0 cables first to the platform, then to the computer.
For first-time installation, contact technical support for program installation and license issuance.
If the program is already installed, turn on the power switch on the left side of the platform. Wait at least 8 seconds; during this time, a red light will blink. If it continues to blink after 8 seconds, the device is functioning correctly. If the light remains steady or off, it indicates electronic damage.

Catalog excerpts

MEDICAL TRIAL PRO 2.0 COMPUTER REQUISITI MINIMI CONSIGLIATI PROCESSORE HARD DISK SCHEDA VIDEO DEDICATA NVIDIA RISOLUZIONE VIDEO SISTEMA OPERATIVO SCHEDA TECNICA Medical Technology s.r.l. Via Gargano 34, 000141 Roma P.Iva 17458581000 Sensore resistivo Spessore lato sensori Pressione massima

Open the catalog to page 1

MEDICAL TRIAL PRO 2.0 Cosa contiene il pacco • Una Trial Pro 2.0 • Un Trasformatore 220/15v • Due camminamenti passivi misura 60x40 cm cadauno. • Un cavo usb 2.0 con doppia ferrite antidisturbo. • Una Licenza software i

Open the catalog to page 2

MEDICAL TRIAL PRO 2.0 Procedura di collegamento • Posizionare a terra la Pedana, ricordiamo che lo strumento ha un verso di acquisizione, il paziente salendo sopra dovrà avere i connettori di alimentazione alla sua sinistra. • Posizionare i due camminamenti passivi uno in entrata e uno in uscita della pedana. • Con l’interruttore di corrente spento, collegare i cavi di alimentazione e il cavo usb 2.0 prima alla pedana e successivamente al computer. • Se si tratta della prima installazione, Contattare il servizio tecnico per procedere con l’installazione del programma e il rilascio della licenza...

Open the catalog to page 3

MEDICAL TRIAL PRO 2.0

MEDICAL TRIAL PRO 2.0

Catalog excerpts

All Medical Technology Italia catalogs and technical brochures