1. Catalogs
  2. Medicalex
  3. Nail-plates and blade-plates
video corpo

Nail-plates and blade-plates

Nail-plates and blade-plates
1 / 12 PagesView full catalog

Nail-plates and blade-plates

Product catalog summary
Overview: This document outlines the specifications, procedures, and recommendations for orthopedic surgical plates and screws, focusing on nail-plates and blade-plates used in bone fracture treatments and osteotomies. It also covers condylar blade-plates for lower extremity femur fractures and osteotomies.
Specifications:
  • Dynamic Hip Screw-Plates: Available in lengths from 70mm to 100mm with 1 to 8 holes, including compression screws and screwdrivers.
  • Stainless Steel DKP Screw-Plates: Offered in angles of 120°, 130°, and 140°, and lengths from 70mm to 100mm.
  • Monobloc Nail-Plates: Lengths range from 70mm to 90mm with 4 to 8 holes.
  • Goose-Neck Tibial Osteotomy Blade-Plates: Designed for angles of 90° and 100°, with lengths of 60mm and 70mm.
  • Strélitzia Condylar Blade-Plates: Available in lengths of 60mm to 80mm with 4 to 8 holes.
  • Condylar Blade-Plates: Available in 95° and 130° angles, with lengths from 60mm to 204mm and 4 to 12 holes.
  • Diaphyseal Screws: Diameters of 4.5mm or 5mm.
Procedures:
  • Dynamic Screw-Plates: Involves aiming, drilling, tapping, screwing, and compression, with X-ray verification and complementary pins for unstable fractures.
  • Monobloc Nail-Plates: Includes aiming, drilling, calibration, nailing, and diaphyseal setting, emphasizing precise alignment.
  • Goose-Neck Blade-Plates: Focuses on pin positioning, calibration, and final operation steps, crucial for upper tibia osteotomies.
  • Strélitzia Blade-Plates: Details aiming and drilling for fracture reduction.
  • Condylar Blade-Plates: Aiming and drilling involve preparing the housing at 30 or 40mm, followed by nailing and diaphyseal setting with screws.
Recommendations:
  • Ensure proper alignment and penetration of pins and screws using guides and X-ray verification.
  • Select appropriate angles and lengths of plates and screws based on specific fracture or osteotomy requirements.
  • Follow procedural steps to avoid complications like pin incarceration or nail slippage.
Important Information:
  • Major indications include true cervical fractures and certain osteotomies.
  • Bibliography references studies on fibular nonunion and blade-plate fixation for distal femoral fractures.
  • Emphasizes precise calculations and careful attention to plate direction during procedures for successful outcomes.
Instruments:
  • Includes cannulated drills, angle sights, drill bit guides, and impactors, with specific tools for Strélitzia and Swan neck nail starters.
See more

Catalog excerpts

Nail-plates and blade-plates-1

Sommaire chapitre Distributeur/Distributor 34, Av du Dr Durand- 94110 ARCUEIL - FRANCE - tél. : [33] (0) 1 46 11 16 20 E-mail : [email protected] - Site Web : http://www.medicalex.info p 1/12 Z:\Catalogue Juillet 2021\Chap6_Plaques-lames

 Open the catalog to page 1
Nail-plates and blade-plates-2

V is plaques dynamiques pour le col du fémur 130° 130° Dynamic hip screw-plates Vis plaques dynamiques Dynamic screw-plates Nombre de trous / Number of holes 1 Vis dynamique et vis à compression Dynamic screw and compression screw Désignation / Description Matériel ancillaire Ancillary material Désignation / Description Désignation / Description Extracteur de vis dynamique Extractor for dynamic screw Tarière coaxiale Coaxial drill Vis de compression Compression screw Désignation / Description Tournevis 6-pans 4,5 pour vis de compression Screwdriver for compression screw 6-sides 4,5 Désignation...

 Open the catalog to page 2
Nail-plates and blade-plates-3

Technique de pose • Setting technique Indications majeures Important information • Fractures cervicales vraies • Certaines ostéotomies • True cervical fractures. • Certain osteotomies. • Drill through the external cortical at the chosen point. •Push the pin (Ø 2,5 lg 20 cm) with the 130° protactor. • After about 60 minutes, replace the protractor with the pin-guide and finish driving the pin. The difference between the pin (200 mm) and the guide (100 mm) allows assessment of the pin’s penetration. • An X- ray test may be useful to check the pin’s status. • A complementary pin, parallel to the...

 Open the catalog to page 3
Nail-plates and blade-plates-4

Vis plaque DKP inox • Stainless steel DKP screw-plate Joint en PE / PE washer Référence Reference Rondelle / Washer Ressort / Spring Référence Reference 45.100.30 Rondelle / Washer Vis / Screw Référence Reference 45.200.70 Epaisseur Thickness Référence Reference Longueur Length Plaque dynamique / Dynamic plate Référence Reference Désignation Name Matériel ancillaire Ancillary material Désignation Description Référence Reference Désignation Description Référence Reference Porte plaque et écrou Impactor Extracteur Extractor Sommaire chapitre Distributeur/Distributor 34, Av du Dr Durand- 94110 ARCUEIL...

 Open the catalog to page 4
Nail-plates and blade-plates-5

Clou-plaque monobloc 130° • 130° monobloc nail-plate Clou-plaque Maconor Maconor nail-plate Long. en mm Length Sommaire chapitre Distributeur/Distributor 34, Av du Dr Durand- 94110 ARCUEIL - FRANCE - tél. : [33] (0) 1 46 11 16 20 E-mail : [email protected] - Site Web : http://www.medicalex.info p 5/12 Z:\Catalogue Juillet 2021\Chap6_Plaques-lames

 Open the catalog to page 5
Nail-plates and blade-plates-6

Technique de pose • Setting technique • Percer la corticale externe au point choisi. • Enfoncer la broche (de 20 ou 25/10) à l’aide du rapporteur, à 130°. • Après 60 mn environ, remplacer le rapporteur par le guide-broche et terminer l’enfoncis. La différen ce entre la broche (200 mm) et le guide (100 mm) permet d’apprécier facilement la pénétration de la broche. • Radio de contrôle pour vérifier la situation de la broche. • Drill through the external cortical at the chosen point. • Drive the pin (of 20 or 25/10) with a protractor, generally at 130°. • After about 60 minutes, replace the protractor...

 Open the catalog to page 6
Nail-plates and blade-plates-7

L ame-plaque col de cygne pour ostéotomie tibiale Goose-neck tibial osteotomy blade-plate Plaque 3 trous Three-holed plate Plaque Grodet Grodet plate Angle Angle Angle Angle Plaque Kerboull Kerboull Plate Angle Angle Broche bicolore, 1 pointe, Ø 2 mm, longueur 20 cm Bi-colored pin, one point, 2 mm Ø, 20 cm long Bibliographie / Bibliography : • M. Ramanoudjame, E. Vandenbussche, T. Baring, N. Solignac, B. Augereau, and T. Gregory, “Fibular nonunion after closed-wedge high tibial osteotomy,” Orthop. Traumatol. Surg. Res., 2012. Lame-plaque Gardes • Gardes condylar blade-plate 90° Désignation /...

 Open the catalog to page 7
Nail-plates and blade-plates-8

Lame-plaque Strélitzia • Strélitzia condylar blade-plate Droit / Length Gauche / Left Bibliographie / Bibliography : • E. Vandenbussche, M. LeBaron, M. Ehlinger, X. Flecher, G. Pietu, and SOFCOT, “Blade-plate fixation for distal femoral fractures: a case-control study.,” Orthop. Traumatol. Surg. Res., 2014 Sommaire chapitre Distributeur/Distributor 34, Av du Dr Durand- 94110 ARCUEIL - FRANCE - tél. : [33] (0) 1 46 11 16 20 E-mail : [email protected] - Site Web : http://www.medicalex.info p 8/12 Z:\Catalogue Juillet 2021\Chap6_Plaques-la

 Open the catalog to page 8
Nail-plates and blade-plates-9

T echnique de pose col de cygne Setting technique gooseneck Indications majeures Important information Ostéotomies de l’extremité supérieure du tibia. Important information : Osteotomies of the upper extremity of the tibia 1) Mise en place de la broche Il faut partir de l’angle de l’implant à utiliser, soit en règle générale, pour les valgisations 90°. Exemple: pour valgiser de 8° on aura : 90° - 8° = 82°. Il faudra fixer le rapporteur à 82°. Start from the implant angle to be used, which is normally 90° for valgisations. Example: for a 8° valgisation, you would have : 90° - 8° = 82°. The protractor...

 Open the catalog to page 9
Nail-plates and blade-plates-10

T echnique de pose lame plaque Strelitzia Setting technique blade-plate Strelitzia Important information Indications majeures Fractures and osteotomies of the lower extremity of the femur Fractures et ostéotomies de l’extremité inférieure du fémur • Fracture réduite et broche en place à 95°: Amorcer le logement sur 30 ou 40 mm avec l’outil défonceur. • Bien calculer le futur plan de la plaque pour ne pas “manquer” la diaphyse. • Reduced fracture and pin in position at 95°: start preparing the housing at 30 or 40 mm with the nail-starter. • Calculate well the future plane of the plate so as not...

 Open the catalog to page 10

All Medicalex catalogs and technical brochures

  1. Various

    14  Pages

  2. Pediatrics

    31  Pages

  3. Spine

    15  Pages

  4. Prostheses

    9  Pages

  5. Thorax

    24  Pages

  6. plates

    23  Pages

  7. Screws

    10  Pages

  8. Staples

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.