- Catalogs
- Medicut Stent Technology
- Aortic-STENT
Aortic-STENT
1 / 3 PagesView full catalog
Aortic-STENT
Product catalog summary
Product Overview
The document describes the Self-Expanding Aortic Nitinol Stent, designed for flexibility and optimal fixation. It features a combination of closed-cell and open-cell structures to balance fixation and flexibility. The stent is equipped with five laser-welded tantalum markers at both the proximal and distal ends for enhanced visibility.
The document describes the Self-Expanding Aortic Nitinol Stent, designed for flexibility and optimal fixation. It features a combination of closed-cell and open-cell structures to balance fixation and flexibility. The stent is equipped with five laser-welded tantalum markers at both the proximal and distal ends for enhanced visibility.
Indications
This stent is indicated for use in treating stenoses and dissections of the aorta, endoleak types 1a and 1b, obstructions of the vena cava, and vena cava syndrome.
This stent is indicated for use in treating stenoses and dissections of the aorta, endoleak types 1a and 1b, obstructions of the vena cava, and vena cava syndrome.
Product Specifications
The stent is available in various sizes with diameters ranging from 14 mm to 40 mm and nominal lengths from 70 mm to 200 mm. It is compatible with a .035 inch guide wire and comes with application devices of 12F, 14F, and 16F, each 100 cm in length.
The stent is available in various sizes with diameters ranging from 14 mm to 40 mm and nominal lengths from 70 mm to 200 mm. It is compatible with a .035 inch guide wire and comes with application devices of 12F, 14F, and 16F, each 100 cm in length.
Application Device Features
The application device includes a PTFE sheath for smooth gliding, radiopaque markers for precise placement, and a coaxial pull-back system for safety and ease of use. The working length of the device is 100 cm.
The application device includes a PTFE sheath for smooth gliding, radiopaque markers for precise placement, and a coaxial pull-back system for safety and ease of use. The working length of the device is 100 cm.
Manufacturer Information
The stent is manufactured by Medicut Stent Technology GmbH, located in Pforzheim, Germany. Contact information includes phone and fax numbers, as well as an email address and website.
The stent is manufactured by Medicut Stent Technology GmbH, located in Pforzheim, Germany. Contact information includes phone and fax numbers, as well as an email address and website.
See more
Catalog excerpts
Self-Expanding Aortic Nitinol Stent
Open the catalog to page 1
Stent visibility 5 tantal markers at proximal and distal end Stent Flexible stent design Closed-cell structure for optimal stent fixation Open-cell structure for high flexibility 5 intergrades laser-welded tantalum markers at proximal and distal end Indication Stenoses and dissections of the aorta Endoleak type 1a and 1b Obstructions of the vena cava Vena cava syndrome Product Specific ions plication Device 12Fx100 cm Application device PTFE sheath for smooth gliding characteristics Radiopaque markers on the inner catheter for exact stent placement Coaxial pull back system for safety and easy...
Open the catalog to page 2
Stent Technology GmbH Christinstraße 15 D–75177 Pforzheim
Open the catalog to page 3All Medicut Stent Technology catalogs and technical brochures
Medicut folder 20172 Pages
multi LOC Dr. Amendt LINC 201631 Pages
Multi-Loc /2loc-3loc3 Pages
Peripheral stent5 Pages
Balloon catheter3 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.