MedimaNet Infusion monitoring and archiving network system. Technical specifications Safe and precise infusion Family of volumetric infusion pumps - Ward monitor - Infusion progress monitoring - Infusion progress archiving - Reports - Automatic transfer of drug libraries to pumps Medima User ToolBox Software supporting infusion safety and precision. Medima Drug Editor IV setPVC with automatic free flow protection; DEHP-free Infusion fluidNo medication restrictions, blood also acceptable Flow rate 0.1 - 1200 ml/h, increments: 0.01 ml/h up to 99.99 ml/h, 0.1 ml/h from 100 ml/h to 999.9 ml/h, 1 ml/h above 1000 ml/h, priming the line 1200 ml/h Infusion volume0.1 - 20000 ml, increments: 0.01 ml up to 999.99 ml, 1 ml above 1000 ml Infusion time1 min - 200 h Bolus Flow rate up to 1200 ml/h, increments: 0.01 ml/h up to 99.99 ml/h, 0.1 ml/h from 100 ml/h to 999.9 ml/h, 1 ml/h above 1000 ml/h. Programmable volume (dose), time or flow rate. Automatic and manual bolus. Induction dose Flow rate up to 1200 ml/h, increments: 0.01 up to 99.99 ml/h, 0.1 ml/h from 100 ml/h to 999.9 ml/h, 1 ml/h above 1000 ml/h. Programmable volume (dose), time or flow rate. KOR (KVO)0 - 20 ml/h, 0.1 ml/h increments Flow rate accuracy (nominal) ±5% over 96h or 10 litres, according to EN 60601-2-24 (with Medima Line IV sets) Occlusion pressure Downstream - 11 levels: 75 - 900 mmHg, automatic reduction of occlusion bolus. Graphic presentation of infusion pressure and set level (pictograms). Upstream occlusion detection. Drop detectorDetachable, optional Air detector Ultrasound, programmable sensitivity: - single bubble: 0.05 4- 0.3 ml - accumulated: 0.1 4 1.5 ml / 15 min. Modes of operation Model P | Model P1, P2 Convenient and safe way of drug libraries creation in Windows environment. Enables fast transfer of drug libraries to pumps. Medima History File Software to archive and review infusions. Graphic presentation of infusion progress, detailed event log, history of infusion parameters modifications. ml/h, ml/min, ml/24h, l/h, l/24h, volume over time - automatic flow rate calculation (refers to all models) _-ng, pg, mg, g, pU, mU, U, kU, nmol, pmol, mmol, mol / kg, -- / min, h, 24h intermittent infusion -profile - 24 cycles Additional functions Automatic free flow protection Drug library with possibility to save up to 120 drugs dosing protocols (models P1, P2) with soft and hard limits for all infusion parameters (model P2) Drug library and configuration transfer from pump to pump Programmable infusion pause: 1 min - 24 h. Delayed start: 1 min - 24 h Programmed parameters and chosen functions protected by password Alarm volume adjustment and choice of sound type Night mode: tuning the display's brightness and alarm loudness, programmable time of start/end Simple fixing to Medima docking stations without removing the fixing clamp and without interruption of infusion. Embedded power supply Possibility to connect to hospital system through the MedimaNet system Open system: software update through RS232C Alarms No mains, battery low, battery empty, check IV set, check clamp, occlusion (upstream), occlusion (downstream), high pressure, line disconnected, flow too low, flow too high, 1 - 30 min to infusion end, infusion end, air in line, air in line ( accumulated), no drop detector, drug not active, improper fixing, error xx, timer, battery disconnected Event log capacityMin. 2000 records with date and time of the event Power supply100 (- 15%) - 230 (+10%) VAC, 50/60 Hz, max 20 VA, 12-16 VDC, max 1 A BatteryNiMH, capacity 2000 mAh, working time: 10 h / 25 ml/h, recharging time to 100% max 6 h InterfaceRS232C and IR link to the docking station Nurse call connection24V, 1 A, NO / NC Dimensions355 x 115 x 166 mm (W x H x D) - excluding pole clamp WeightBelow 2.5 kg Operating conditionsTemperature: +5 4 + 40oC, max humidity 90% Transport conditionsTemperature: -20 4 + 50oC, max humidity 95% ClassificationClass I, type CF, defibrillation proof, IP 22 Safety standards compliance EN 60601-1, EN 60601-1-2, eN 60601-2-24, MDD 93/42/EEC - IIb Docking stationsDesigned to accommodate 2, 4, 6 or 8 infusion pumps and a docking station designed for ambulances Accessories* RS232C cord, DC power supply cord, Nurse call cord Infusion stand for Medima infusion pumps and Medima docking stations fixing Duo holder for fixing and carrying two Medima infusion pumps Software packets: Medima User ToolBox, Medima Service ToolBox, MedimaNet network software Medima Line IV Sets :Accessories are not standard equipment of pumps. In pursuit of quality improvement and due to changing standards the information in this leaflet may be subject to change. Contact Medima Sp. z o.o. to verify the information. Medima Service ToolBox Contains Medima Loader and Medima Configurator. Enables pumps upgrade as well as setting and uploading configurations to pumps adjusted to user's needs. Project co-financed by the European Union from European Regional Development Fund medima Free copy - DH-Px-01-EN-06 2014.10.01

Syringe Pumps Safe infusion systems Large and Easy-to-Read Display Shows infusion rate, a drug name, power supply status, infusion pressure and other information. Data are readable from a considerable distance. Intuitive User Interface Identical for syringe and volumetric pumps, makes it easy to operate pumps even for beginners. Its numeric keyboard allows for fast and easy data input. Easy Mounting of IV Sets Our unique system for automatic IV set mounting ensures easy and reliable operation of the pump, shortening preparatory procedure. The pump displays messages which guide through the infusion...