network software medima medima Technical specifications Medima Modular Infusion System MedimaNet provides information about infusions out across the Care Unit or even by individual pumps and automatically transfers it to pDmS/HIS. Centralized alarm system indicates pumps currently in active operation requiring intervention. Remaining infusion time list indicates incoming events. Syringe pumps Syringe types 2 - 50/60 ml of all world known brands, automatic type recognition, other syringes may be calibrated according to customer needs Flow rate accuracy±2% in accordance with EN 60601-2-24 Operation modes ml/min, ml/h, ml/24h ng, pg, mg, g, pEg, mEg, Eg, mlU, IU, klU, mIE, IE, klE, mmol, mol, cal, kcal, J, kJ Units/kg, lb, in2, m2/ min, h, 24h continuous, intermittent and profile (24 cycles) infusion TPN mode PCA/PCEA mode TCI/TIVA mode * Occlusion pressure detection 12 levels, 50 mmHg - 900 mmHg, automatic reduction of occlusion bolus Drug library (S300 only) 6000 drug protocols, 40 Care Units, 40 categories Soft and hard limits, advisory notes, alarm priority, security level, max syringe size, additional pump configuration parameters for each drug and care unit Additional functions Colour display, touch screen Automatic syringe fixation, improper syringe fixation alarm Infusion parameters protected by password with two levels of protection Fast keypad lock History log with minimum 2000 entries, each containing event date and time Night mode Connectivity to hospital information system (HIS) via MedimaNet software Automatic configuration by Medima ToolBox or MedimaNet software Power supply100 - 230 V AC, 12-15 V DC, internal battery NiMh, 30h - 5ml/h, 4.5 hour to full charge Weight Less than 2.2 kg Classification Protective Class II, type CF, defibrillation proof, IP 22 ecent achievements in drug library and safety technology Patient's infusion screen shows all the details of the actual therapy. Configurable charts and reports allow statistical analysis of completed infusions and assist with implementation of new DERS technologies. Volumetric pumps Flow rates0.1 - 1200 ml/h IV setPVC DEHP-free, with automatic free flow protection Flow rate accuracy±5% in accordance with EN 60601-2-24 (with Medima Line IV sets) Operation modes ml/min, ml/h, ml/24h ng, pg, mg, g, pEg, mEg, Eg, mIU, IU, kIU, mIE, IE, kIE, mmol, mol, cal, kcal, J, kJ Units/kg, lb, in2, m2/ min, h, 24h continuous, intermittent and profile (24 cycles) infusion TPN mode PCA mode TCI/TIVA mode * Occlusion pressure detection 12 levels, 50 mmHg - 900 mmHg, automatic reduction of occlusion bolus Drug library (P300 only) 6000 drug protocols, 40 Care Units, 40 categories Soft and hard limits, advisory notes, alarm priority, security level, additional pump configuration parameters for each drug and care unit Additional functions Colour display, touch screen Infusion parameters protected by password with two levels of protection Fast keypad lock History log with minimum 2000 entries, each containing event date and time Night mode Connectivity to hospital information system (HIS) via MedimaNet software Automatic configuration by Medima ToolBox or MedimaNet software Power supply100 - 230 V AC, 12-15 V DC, internal battery NiMh, 15h - 25ml/h, 4.5 hour to full charge Weight Less than 2.1 kg ClassificationProtective Class II, type CF, defibrillation proof, IP 22 Compliance EN 60601-1, EN 60601-1-2, EN 60601-2-24, EN-1789, MDD 93/42/EEC - II b Infusion systems have never been so easy Simple and intuitive operation Colour display with touch screen State-of-the-art precision infusions

Medima Modular Infusion System Syringe pumps Volumetric pumps Medima infusion systems – versatile and flexible solutions, tailored to the individual needs of hospitals and clinics. Multiple pumps and docking stations with software designed to cover all Critical Care Areas. Straightforward and intuitive interface using colour touch screen technology spells an end to complicated and hard-to-reach menus. Touch the selected element on the screen and the pump is ready for programming. Quick and safe to change the infusion rate, VTBI, occlusion pressure or start other pump functions. Infusion systems...