Flyer_medin_Rev04
2Pages

Catalog excerpts

Driver units medinCNO® Medijet® - Active/ Variable flow generator Mask width nose [mm] Binasal diaphragm Packaging unit Comprehensive combination of basic nCPAP monitoring, Synchronzation bilevel nCPAP and nasal high frequency ventilation Real pressure trigger Special Apnea Mode Accessories identical to medinSINDI Intuitive and user friendly Battery operating for 2h Prongs Advantages of the nCPAP Medijet® Generator: Display of nCPAP presure in analogue curve and digital from Display of oxygen concentration in bargraph and digital form Display spontaneous breathing frequency in blinking and digital form Display of flexible setting upper and lower alarm for nCPAP pressure Reset alarms - mute 2 minutes or quiet Disconnection alarm for nCPAP (if patient is lower than 1,5 cm H2O) Integrated service software Battery operating for 5 hrs. (incl. charging control) FiO2 Trend Manual push ventilation with REF SMPV Increase of FRC and improvement of compliance (1), (2) Reduction of work of breathing (3), (4) Low noise level (5) Benveniste principle (6) with volume reservoire, prenasal pressure measurement + non-aggressive flow application Perfect combination in use with our medinCNO® driver large wide Packaging unit CPAP should be easy, inexpensive and safe! Bonnets - Disposable Packaging unit Bonnets - Reusable Advantages of the nCPAP Miniflow® Generator: Blender with Flowmeter REF 1090 The blender is mounted together with two flowmeters (0-3,5/ 0-15 lpm). The connection to the circuit is a 22M or tapped connector. Blender as single unit REF 1085_15 The blender as single unit with a screwable flowmeter (3 lpm of 15 lpm). The connection to the circuit is a tapped outlet converter. Minimal dead space Separation of inspiration- and expiration- gases Compatible with Medijet® accessories Reduction of work of breathing (7) Flexible prong adapter for best position Simple use Head circumference [cm] Packaging unit Fixation pillow Measuring tape Bubble CPAP system The bubble CPAP system is an easy and cheap solution to combine a blender with a mechanical CPAP valve (adjustable from 0.5 to 9.5 cm H2O). Fixes the generator more stable on the cap. Packaging unit The measuring tape is the best way to choose the correct size. Packaging unit

Open the catalog to page 1

How to find your system Circuits Medijet® Device Diameter connectors Inspiration/ expiration Additional connectors Patient circuit Patient circuit Patient circuit Patient circuit Patient circuit Ventilator/ Bubbler All single use circuits contain a pressure line. Circuits Miniflow® Diameter connectors Inspiration/ expiration Additional connectors Patient circuit Water trap / chamber Patient circuit Water trap Patient circuit Pressure line All single use circuits contain a pressure line. Patient circuit Patient circuit Heated 206746, 206748 Temperature Probe, Electrical adapter Nasal canulla...

Open the catalog to page 2