OP_Blender
18Pages

{{requestButtons}}

Catalog excerpts

OP_Blender - 1

Operating, cleaning and maintenance instructions medinBLENDER - Gas mixer for air and oxygen medin Medical Innovations GmbH Adam-Geisler-Str 1 D-82140 Olching +49 8142-44846-0 www.medingmbh.com info@medingmbh.com

Open the catalog to page 1
OP_Blender - 2

Contact and ordering information Model 1085_15: medin Medical Innovations GmbH Adam-Geisler-Str. 1 D-82140 Olching Sales and customer service: by authorised partners: www.medingmbh.com © Copyright notice This document is the exclusive property of medin Medical Innovations GmbH. No part of this document may be copied or otherwise reproduced or stored in any form on electronic media without prior written consent of the company, except in the case of express authorisation from the company. Contact the manufacturer for further information. Information on the validity and retention time of...

Open the catalog to page 2
OP_Blender - 3

Warranty With this warranty, the manufacturer guarantees, for a period of 12 months, that this product has no material and processing defects at the time of initial purchase. If the product should have any defects during the period of the warranty (at the time of the initial purchase) based on material or workmanship, the manufacturer or his authorised sales and service partner will repair the product at no charge for labour or material costs under the following conditions, or (at the manufacturer's discretion) will replace the product itself or its defective parts. The manufacturer and his...

Open the catalog to page 3
OP_Blender - 4

medin Medical Innovations GmbH Adam-Geisler-Str 1 D-82140 Olching +49 8142-44846-0 www.medingmbh.com info@medingmbh.com OP_blender_all_EN_REV04.docx 14.11.2014

Open the catalog to page 4
OP_Blender - 5

Note Please read these instructions carefully before using the device. Please keep the original packaging in the event the device needs to be returned. Please make a note of the serial number on the identification plate on the backside of the gas mixer (1090) for your records. Please be aware that the serial number of the easy Blender (1085_15) can be found on the bottom, and that the Bubble System does not have any serial number. Warning: - Do not use any oil or lubricant on or near the oxygen equipment - Do not place any containers with liquids on the device - Oxygen may only be supplied...

Open the catalog to page 5
OP_Blender - 6

The medinBLENDER is an air and oxygen mixer with an integrated flow regulator. It has an acoustic alarm unit and a safety warning system in the case of low gas pressure. Normal operating pressure of the mixer is 3.5-6.0 bar (350kPa to 600kPa). In the case of reduced inlet pressure of one of the gases, the mixer automatically reduces the pressure of the other gas, as long as the difference between the two gases is not more than 100 kPa (1 bar). In addition, the mixer has a 'bleed flow'. This function ensures that the adjusted concentration is immediately available. The 'bleed flow' is...

Open the catalog to page 6
OP_Blender - 7

2 Product Specifications The product specification is based on your specific product. Operating Ranges 21-100% continuous adjustment of the oxygen concentration - accuracy 3 vol.% of the set value Flow rate 0 to 3,5 l/min or 15 l/min – accuracy ±0.5 L/min Knob to operate mixer (oxygen concentration) Knob to operate flow regulator Push-rotate for opening and closing the bleed (flowmeter 0 – 3,5 l/min) Oxygen supply pressure Air supply pressure Alarm in the event of low air supply pressure Alarm in the event of low oxygen supply pressure Alarm in the event of a difference in pressure between...

Open the catalog to page 7
OP_Blender - 8

Number List Description medinBLENDER medin easy Blender (without flowmeter - replacement part) medinBLENDER with 15 L flowmeter Outlet converter (F15 mm, M22) optional Tapped connector (4-7 mm internal diameter tube) Bracket for mounting to a rail (10 x 25 mm) - 1085_15 Bracket for mounting to a rail (10 x 25 mm) - 1090 Bracket for mounting to a pole – 1090 Single pole clamp Fastening screw for fastening the bracket to a rail various versions available Table 1: Order numbers 2.10 Accessories Description Medijet® – Active CPAP Generator REF 1000 (single-use) 1010/ 1020 re-use Miniflow® –...

Open the catalog to page 8
OP_Blender - 9

Push the bracket for mounting onto the base on the back of the mixer. Now you can easily attach the medin mixer (any model) to any standard rail (10 mm x 25 mm) using a screw. Mounting 1085_15 with Bubble Water Column (2040) For this system, medin offers a special bracket for two systems to be mounted at the same time (humidifier and Bubble Water Column). This can be attached to a rolling cart using a star-shaped screw knob. For order number, see Table 1: Order numbers. 1. Connect the air and oxygen tube to the two inlet connections of the mixer. These are marked on the device and coded as...

Open the catalog to page 9
OP_Blender - 10

(V) Adjustment knob for amount of outgoing flow (0-15 L/min) Flowmeter Mixer (V) flow outlet Gas supply AIR (b/w) and O2 (white) Figure 1: Blender - components 4.1.1 FiO2 Concentration Turn the FiO2 knob of the mixer to the right (increase in FiO 2) or to the left (decrease in FiO2) in order to adjust the FiO2 concentration. (Adjustment range: 21 to 100% oxygen). 4.1.2 Flow The ball in the flowmeter indicates the flow rate. If the control knob of the flowmeter is turned to the right, the flow rate decreases (adjustment range: 0 – 3,5l/min or 0 to 15 l/min). If you are using the small flow...

Open the catalog to page 10
OP_Blender - 11

(V) ° Adjustment knob for amount of outgoing flow (0-15 l/min) Flowmeter Mixer Figure 2: 1085_15 - components 4.2.1 FiO2 Concentration Turn the FiO2 knob of the mixer to the right (increase in FiO 2) or to the left (decrease in FiO2) in order to adjust the FiO2 concentration. (Adjustment range: 21 to 100% oxygen). 4.2.2 Flow The ball in the flowmeter indicates the flow rate. If the control knob of the flowmeter is turned to the right, the flow rate decreases (adjustment range: 0 - 15 L/min). 4.2.3 Important Note Do not turn the flow rate knob forcefully. Check the tube connections and the...

Open the catalog to page 11
OP_Blender - 12

Model 1085_15 in combination with Bubble Water Column (2040) Bubble Water Column 2040 Figure 3: Bubble CPAP System medin 4.3.1 FiO2 Concentration Turn the FiO2 knob of the mixer to the right (increase in FiO2) or to the left (decrease in FiO2) in order to adjust the FiO2 concentration. (Adjustment range: 21 to 100% oxygen). 4.3.2 Flow The ball in the flowmeter indicates the flow rate. If the control knob of the flowmeter is turned to the right, the flow rate decreases (adjustment range: 0 to 15 L/min). A constant flow rate of 7 L/min is recommended. This offers the best mix of effectiveness...

Open the catalog to page 12

All Medin Medical Innovations GmbH catalogs and technical brochures

  1. Nuflow®

    2 Pages

  2. Pb_1000_long

    3 Pages

  3. OP_Medijet

    103 Pages

  4. Pb_4000_long

    3 Pages

  5. OP_Miniflow

    103 Pages

  6. OP Bubble

    2 Pages

  7. Processing

    4 Pages

  8. Pb_1207_long

    2 Pages

  9. PB_1207MKI

    2 Pages

  10. PB_1207

    2 Pages

Archived catalogs

  1. MEDINsindi

    2 Pages

  2. Medin_Catalog

    16 Pages

  3. OP_Medijet_1000

    104 Pages

  4. products_medin

    16 Pages