Catalog excerpts
sindi Universal gas delivery unit with multi function monitor REF 1080 Technical specifications Pneumatic: • Universal driver with pneumatic gas blender for oxygen and air • Setting range 21% to 100% oxygen – step less • Automatic alarm system for drop in air or oxygen pressure • Independent from electrical power • Pressure of oxygen and air supply: 3,5 to 6 bar. • Pressure difference of air and oxygen supply < 1 bar • Integrated flow meter with needle valve, range 0 to 16 L / min. • Flow outlet connector, universal standard with adaptors for 15 and 22 mm • Integrated oxygen sensor for FiO2 measurement • Type of oxygen sensor: OOM102 and MLF 16 • Mechanical Blender independent from electronic and monitor functions Electronic: • The electronic system is completely battery driven and recharged by an ext. power supply • Operating time in battery-powered mode is approx. 5 hours (for transportation) • Internal battery: 9,6 Volt NiCd recharge, easy to exchange • Continuous running with ext. power supply • Measurment data output by RS 232 Monitor with 96 x 61 mm embedded LCD display: • Solution 240 x 128 dots B/W • Background illumination (automatically reduced in battery powered mode) • Microprocessor controlled data scanning system with EEPROM (update possibility) Display and Functions: • ON and OFF button for the device on the front • Report of nCPAP pressure: analogue curve and digital form • Report of oxygen concentration: bar-graph and digital form • Report of spontaneous breathing frequency: blinking and digital form • Report of flexible setting of upper and lower alarm for nCPAP pressure • Reset of alarms - mute for 2 minutes or quit • Activation of FiO2 concetration alarm (±10%) • Disconnection alarm for nCPAP circuits Purpose of use: Therapeutic enrichment of the respiratory gas mixture with oxygen for neonates and premature babies. Used in combination with the nCPAP Medijet® Generator for supportive respiration with a constant positive arwaiy pressure (CPAP). Mounting: • Easy mounting of driver on standard hospital rail (10x25 mm) with integrated clamps • Pole mounting with rail clamp converter, very easy to handle (no tools needed) Important instructions: The device may only be used with simultaneous hemodynamic monitoring of the patient. The gas blender may only be used by trained medical personnel. FOR CLINICAL USE ONLY Certification in accordance with DIN EN ISO 9001, DIN EN ISO 13485, Annex II section 3 of the Council Directive 93/42EEC
Open the catalog to page 1All Medin Medical Innovations GmbH catalogs and technical brochures
-
Nuflow®
2 Pages
-
Pb_1000_long
3 Pages
-
PB_medinBLENDER_1093_1094
2 Pages
-
OP_heated_circuits_all_languages
24 Pages
-
OP_Nuflow_all_languages
127 Pages
-
OP_Medijet
103 Pages
-
Pb_4000_long
3 Pages
-
OP_Miniflow
103 Pages
-
OP Bubble
2 Pages
-
medin Company Brochure
16 Pages
-
Processing
4 Pages
-
Pb_20674X_short
2 Pages
-
Pb_20674X_long
3 Pages
-
Pb_1207_long
2 Pages
-
PB_1207MKI
2 Pages
-
PB_1207
2 Pages
-
OP_Blender_Rev09_all languages
115 Pages
-
Nuflow® Nasal cannula set
2 Pages
-
Promo Sheet Nuflow
2 Pages
-
Order Information Nuflow
2 Pages
-
OP_medinCNO_3090_REV12
68 Pages
-
OP Pediflow all languages
65 Pages
-
OP_medinCNOmini_3080_EN_Rev03
64 Pages
-
OP_medinSINDI_1080_REV14
36 Pages
-
Guideline_for_Transport_Rev06
20 Pages
Archived catalogs
-
medin Company Brochure
16 Pages
-
Flyer_medin_Rev04
2 Pages
-
Prospect_products_medin_Rev09
20 Pages
-
medinCNO®mini
4 Pages
-
MEDINsindi
2 Pages
-
Short_Application_Medijet_
2 Pages
-
Catalogue Pediflow®
4 Pages
-
Prospect_nasal_canula
4 Pages
-
Prospect_Miniflow_Bubble
4 Pages
-
Prospect_medinCNO
4 Pages
-
Medin_Catalog
16 Pages
-
Flyer_reuseable_bonnets
1 Pages
-
user_manual_medinSINDI
36 Pages
-
OP_Blender
18 Pages
-
OP_Circuits_heated
32 Pages
-
user_manual_medinCNO
59 Pages
-
OP_Miniflow_4000
96 Pages
-
OP_Medijet_1010_1020
4 Pages
-
OP_Medijet_1000
104 Pages
-
OP_Circuits_unheated
32 Pages
-
products_medin
16 Pages