user_manual_medinSINDI
36Pages

Operating, cleaning and maintenance instructions medinSINDI Universal Gas Supply Unit with Pressure Monitor medin Medical Innovations GmbH Adam-Geisler-Str. 1 D-82140 Olching +498142-448460 www.medingmbh.com info@medingmbh.com

Operating, cleaning and maintenance instructions Contact and ordering information medin Medical Innovations GmbH Adam-Geisler-Str. 1 D-82140 Olching Sales and customer service: by authorised partners a detailed list can be found on the website www.medingmbh.com Copyright This document is the exclusive property of medin Medical Innovations GmbH. No part of this document may be copied or otherwise reproduced or stored in any form on electronic media without prior written consent of the company, except in the case of express authorisation from the company. Contact the manufacturer for further...

Operating, cleaning and maintenance instructions Warranty With this warranty, the manufacturer guarantees, for a period of 12 months, that this product has no material and processing defects at the time of initial purchase. If the product should have any defects during the period of the warranty (at the time of the initial purchase) based on material or workmanship, the manufacturer or his authorised sales and service partner will repair the product at no charge for labour or material costs under the following conditions, or (at the manufacturer's discretion) will replace the product itself...

Operating, cleaning and maintenance instructions accidents, fire, liquids, chemicals, other substances, flooding, vibrations, excessive heat, insufficient ventilation, sudden power spikes, overly high or inverse voltage or input voltage, radiation, electrostatic discharges (including lightning strikes, other external forces and impacts). Warranty Exclusions and Limitations With the exception of the points mentioned above, the manufacturer does not provide any express, tacit, legal or other guarantees regarding the quality, performance, accuracy, reliability, suitability for a particular...

Operating, cleaning and maintenance instructions Warranty Table of Contents List of Figures List of Tables Electromagnetic Compatibility Intended Use 1.1. Pneumatic Blender 1.2. Electronic Monitoring Unit 2. Product Specifications 2.1. Modes 2.2. Controls and Displays 2.3. Monitoring 2.4. Pneumatic Properties 2.5. Power Supply 2.6. Atmosphere and Environment 2.7. Dimensions and Weight 2.8. Overview of the General Technical Description 2.9. Accessories for medin medinSINDI REF 1080 3. Unpacking and Set-Up 3.1. Mounting and Setting Up the Parts 3.2. Connection to Gas Supply 3.3. Gas Supply...

Operating, cleaning and maintenance instructions 6. Cleaning and Maintenance 6.1. Cleaning 6.2. Exchange of the Internal Batteries 6.3. Repairs 6.4. Device Modifications 6.5. Power Supply Unit (Cleaning, Maintenance, Repairs and Modifications) 6.6. Maintenance 6.6.1. Every 2 months - oxygen calibration: 6.6.2. Maintenance intervals: 6.7. medinSINDI - Basic Construction of the Monitor and the Mixer 7. Explanation of the Symbols 7.1. Device Symbols 7.2. Symbols Used on Buttons 8. Glossary 9. Appendix – Device Passport Gerätepass/Device Passport Figure 1: Screws for attachment to the rolling...

Operating, cleaning and maintenance instructions Do not place any containers with liquids on the device Oxygen may only be supplied via the connection provided The oxygen supply must be monitored This equipment may be changed without prior notice The medinSINDI may not come into contact with flammable anaesthesia gases or other flammable materials while in use. Electromagnetic Compatibility It is confirmed that the device meets the EMC guidelines 89/336/EEC, 93/68/EEC and 93/42/EEC. Intended Use Therapeutic use for enriching the breathing gas mixture with oxygen for premature and newborn...

Operating, cleaning and maintenance instructions Product Description medinSINDI universal gas supply unit with pressure monitor is an electronic unit with microprocessorcontrolled monitoring and is used to display the set parameters. The unit is battery-operated and is charged by an external power supply plug. The screen is backlit. The operating time without mains power is approximately 5 hours. The oxygen concentration is determined in the gas flow delivered. The O2 cell is delivered ready to use by a known manufacturer. This cell generates an analogous DC voltage proportional to the...

Operating, cleaning and maintenance instructions Product Specifications Automatic shutoff of the pressure monitor if no CPAP use is taking place 21–100% continuous adjustment of the oxygen concentration Reset for alarms – 2-minute alarm silencing (make silent or end): Warning – Alarm Silencing Silencing the alarm requires additional monitoring of vital signs! 2.2. Flow adjustment control knob FiO2 adjustment control knob Soft-touch membrane keypad Monitor with integrated 96 x 61 mm LCD display and illumination resolution 240 x 128 dots b/w Monitoring Confirmation of the nCPAP alarm setting...

Operating, cleaning and maintenance instructions Power Supply The electronic system is fully battery-operated and can be recharged with an external power supply plug. Uninterruptible operation for an intensive care unit, with an external power supply plug (automatic 100 to 230 V AC) Input voltage, external power supply plug, mains adapter: 100 - 230 V AC Input frequency mains adapter 50 – 60 Hz Power input: 400 mA Output voltage 24 V DC/625 mA Internal battery: rechargeable– NiMh 9.6 volts/1100 mA Internal battery life: approx. 5 hours (when fully charged) Battery charging time – max. 5...

Operating, cleaning and maintenance instructions Dimensions (height x width x depth): 180 x 240 x 145 mm (without connections and holder) Weight: 2.6 kg (without holder) 2.8. Overview of the General Technical Description Information on these points can be found in the chapters indicated: Conditions for use, transport and storage: see chapter 3.7 Characteristics and accuracies of the device: see chapter 2 Information on the installation of the device: see chapter 3 Description of the supply gases required: see chapter 3.3 Description of the power supply: see chapter 3.4 The device is...