470 mm 420 mm (with guide Bars 710 mm) 660 mm 112 kg without tools 350 x 350 mm Max. depth of Blister 105 mm 620 mm 420 mm (with guide Bars 710 mm) 660 mm 135 kg without tools 350 x 500 mm Max. depth of Blister 105 mm 840 mm 940 mm (with guide Bars 970 mm) 890 mm 225 kg without tools 350 x 700 mm Max. depth of Blister 135 mm Heat-sealing machine for medical blister Design Sealing temperature Sealing force Sealing time Output Compressed air connection Compressed air consumption Electrical connection Options Warranty MEDIPACKER TS 3535 MEDIPACKER TS 5035 MEDIPACKER TS 7035 Qualifiable to the requirements of the FDA and GMP (DQ/IQ/OQ/PQ) rust-free INOX construction, Aluminium parts anodized Digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system Programmable via touch screen from 6 kN to 36 kN (up to 54 kN as an option for the models 5035 and 7035), adjustable in 1 kN steps, repetition accuracy within 0.5 kN Programmable from approx. 1.0 to 9.9 seconds, each 0.1 second adjustable repetition accuracy better than 0.15s Approx. 12 Cycles/Minute, without placing and removal of Trays 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m Compressed air must be supplied filtered and dry The consumption per cycle at 16,5 NL to 0,5 MPa 230 VPNE 50/60 Hz, max. 2300 VA/MEDIPACKER TS 7035; 3 x 400 V, 50 Hz, max. 4100 VA Roll-table with integrated tool storage system, Interface for printer, tool identification, Program memory, Qualification of the system, Blister depth of 150 mm, Automatic drawer drive for TS 5035 and 7035, Sealing lid from a film roll Two years on the Sealing Press – not including wearing parts (seal rubbers and pins) Transportation and travelling charged at cost MEDIPACK AG German Subsidiary c/o Dachser SE Josef-Schüttler-Str. 5 78224 Singen Germany [email protected] Certified to ISO 13485:2016 Technical subject to change www.medipack.com Height Weight Seal surface Width Depth

MEDIPACKER TS This table model, with it’s compact and durable design, has been specially developed for the medical industry and use in clean room areas. The three process parameters Time, Pressure and Temperature are regulated to the tightest tolerances so that the result is a high quality package. The MEDIPACKER TS is a universal heat-sealing machine with the highest level of control for sealing preformed Trays (blisters) with die-cut lids made of Tyvek®, Medical paper or compound foil Highlights of the MEDIPACKER TS: • Easy programming of the seal parameters using the Touch Screen. • Actual...