MEDIPACKER TSF TRAY SEALER for sealing film from a roll MEDIPACKER TS 5035F Qualifiable to the requirements of the FDA and GMP (DQ/IQ/OQ/PQ)

The filled blister packs are placed on the support plate. The carriage is pushed to its rearmost stop. Automatically the sealing cycle is initiated and the sealing lids are punched. The carriage is pulled back again after the sealing cycle. MEDIPACKER TS 5035F The 3 seal process parameters, sealing time, sealing force and sealing temperature, are controlled to the tightest tolerances. The film draw-off length can be set conveniently using the touch screen in single millimetre increments. This results in high quality packs; the process monitoring complies with the latest quality assurance requirements....

Design Film roll Sealing temperature Frame and cover panels made of stainless steel, with aluminium parts anodised or ALTEF coated Diameter max. 300 mm; core diameter 76 mm; roll width max. 300 mm Programmable via touch screen from 20 °C to 190 °C, in 1 °C increments Control accuracy at 130 °C +/–1.0 °C Programmable via touch screen from 6 kN to 36 kN, in 1 kN increments Repetition accuracy within 0.5 kN Programmable via touch screen from 0.2 sec to 9.9 sec, in 0.1 sec increments Repetition accuracy less than 0.15 seconds Programmable via touch screen from 0 mm to 999 mm, in 1 mm increments Approx....