NRX® Wrist for TFCC


Catalog excerpts

NRX® Wrist for TFCC - 1

NRX® Wrist for TFCC Material NRX® Strap Strap 110 mm and 50 mm and NRX® Strap PLUS 50 mm 3 Cut the wrist part from the 110 mm NRX® Strap. The small reinforcement should be cut from the NRX® Strap PLUS and the arm strap in 50 mm NRX® Strap. Apply the NRX® Strap PLUS reinforcement over the volar part. Stretch the strap as much as possible and apply it over the ulnar part to compress and support the ulnar bode and the TFCC ligament area. It might be beneficial to position the arm in a neutral position to reach a higher stability over the ulnar part. Start by applying the thumb through the hole. Run the strap around the wrist to support the dorsal and ulnar side. Secure it with the hook tab. Then apply the lower strap the same way. Last apply the 50 mm NRX® Strap over the middle of the lower arm. This strap could also be made in NRX® Strap PLUS for more stability. For larger arms we recommend to cut the strap from the 110 mm width into a 60–75 mm with in order to get more rotation stability. Caring instructions The NRX® strap can be washed in 40 degrees machine wash with a liquid detergent. Always use a laundry bag. Remove the hook parts before washing and let air dry. © Mediroyal Nordic AB 2019 Mediroyal Nordic AB · Box 7052 · 192 07 Sollentuna · Sweden · Tel +46 8 506 766 00 · · NRX® Strap · Wrist for TFCC

Open the catalog to page 1

All MediRoyal Nordic catalogs and technical brochures

  1. Shoulder Brace

    51 Pages