MA - 0975
1 / 2Pages

Catalog excerpts

Product Specification gfw Product: Autopsy Table, stationary with pedestal, perforated work area and „side wall“ downdraft extraction Autopsy Table (stationary pedestal design) with perforated work area, „side wall“ downdraft extraction and sink (to be connected to an in-house extraction system). Type: 0975.0 Description Newly designed concept with a perforated work area for optimum extraction of fumes. For use in Human & Veterinary Pathology. Square pedestal (900 x 700mm) with strong base plate for optimum strength and stability. MA-0975 Autopsy Table with side wall downdraft extraction The upper part of the table is constructed like a large sink (140mm high), which is covered with 4 perforated plates. It contains a large drain sewer (160mm dia. / 130mm deep) with a residue basket and pipe closure. The bottom of the plenum has no opening for the extraction of air for optimum sterilization and cleaning purposes. At two sides of the walls of the plenum a double slot system is incorporated, which guarantees an effective and even extraction all around the work area. The actual extraction is provided by an external fan system or an in-house extraction system. The air is extracted through the pedestal and by duct work (200mm dia.) installed in the actual floor. At each side of the plenum the especially designed extraction slots are present. The underside of the plenum is noise dampened. The complete top of the MA-0975 table contains a double wall of 74 mm width. Unique MEDIS MT side wall downdraft extraction system (standard feature). Note: there is no air extraction whole in the plenum of the large sink below the work area! Features Sink 500 x 400 x 250(D)mm) with overflow valve and shortneck-inflowtap. Warm - / cold water knee operated valve. Flexible shower with 3m hose, which maybe fixed in the centre of the organ sectioning table (optional accessory) for optimum wash down purposes over the whole length of the body. The pedestal contains 2 revision doors for easy access in case of service, the extraction and sanitary installations and of a unique, sturdy stainless steel frame for optimum stability. This unique service free feature guarantees a very good sturdy design and consequently, a long life cycle of the product itself under daily tough work conditions. 2 x splash proof 230V receptacles and up / down switches on both sides of the pedestal for effective work cycle. The double slot wall extraction system avoids dirt and waste to enter the duct work and the inside of the pedestal. MEDIS Medical Technology GmbH Headquarters Adalbert-Stifter-Str. 12 D-94234 Viechtach / Germany MEDIS Medical Technology GmbH Dpt. Marketing and R&D Bachstr. 9 D-35418 Buseck / Germany VAT I.D No.: DE 257 930 159 Trade Register I.D.No.: HRB 3402 Manufacturer I.D. No.: 21659

Open the catalog to page 1

Optional Accessories - organ table with cutting board (corian), concave embossment and drain holes. Removable side walls. Drainage at centre of sectioning area. 2 splash guards. Trays for instruments. Plastic gliders for easy movement of organ table at side rails of autopsy table. Type: MA-0985 - “PerfuTek” Embalming / Perfusion System consisting of: electrical pump with adj. pressure / 3 different needles / tubing set. All placed at a detachable platform mounted to the table - steady water flush system of plenum by means of spray jets MA-0985 organ sectioning table (cutting board not...

Open the catalog to page 2