MA-0976
1 / 2Pages

Catalog excerpts

Technical Specification Product: Cat.-No.: Autopsy Table with Pedestal, Stationary, Perforated Workarea and „Side Wall“- Downdraft Extraction, Rotating Top MA-0976 Autopsy Table ( Pedestal Design ) With perforated Workarea, „Side Wall“-Downdraft Extraction and sink ( to be connected to an in-house extraction system). Typ: MA-0976 Concept and Design Newly designed concept with a perforated work area for optimum extraction of fumes. For use in Human & Veterinary Pathology. MA-0976 Autopsy Table with side-wall downdraft extraction and rotating worktop Hexagonal pedestal (700 x 700mm) with strong base plate for optimum strength and stability. The upper part of the table is constructed like a large sink (140mm high), which is covered with 4 perforated plates. It contains a large drain-sewer (160mm dia. / 130mm deep) with a residue basket and standing valve. The bottom of the plenum has no opening for the extraction of air for optimum sterilization and cleaning purposes. At two sides of the walls of the plenum a double slot system is incorporated, which guarantees an effective and even extraction all around the work area. The actual extraction is provided by an external fan-system or an in-house extraction system. The air is extracted through the pedestal and by duct-work (200mm dia.) installed in the actual floor. At each side of the plenum the especially designed extraction slots are present. The underside of the plenum is noise dampened. The complete Unique MEDIS Side Wall Downdraft top of the MA-0975 table contains a double wall of 74mm width. Sink 500 x 400 x 250(D)mm) with overflow-valve and shortneck-inflowtap. Warm-/Coldwater knee operated valve. Flexible shower with 3m hose, which maybe fixed in the centre of the organ sectioning table (optional accessory) for optimum wash-down purposes over the hole length of the body. Extraction System (Standard Feature). Note: there is no air extraction whole in the plenum of the large sink below the work area! The pedestal contains: 2 revision-doors for easy access in case of service, the extraction and sanitary installations and of a unique, sturdy stainless steel frame for optimum stability. This unique service-free feature guarantees a very good sturdy design and, consequently, a long life cycle of the product itself under daily tough work conditions. Standard features 2 x splash proof 230V recepticals and up / down switches on both sides of the pedestal for effective work-cycle. The double-slot wall extraction system avoids dirt and waste to enter the duct-work and the inside of the pedestal. Rotating worktop (2 x 45° with quick lock device. ) MEDIS Medical Technology GmbH Headquarters Adalbert-Stifter-Str. 12 D-94234 Viechtach / Germany MEDIS Medical Technology GmbH Dpt. Marketing and R&D Bachstr. 9 D-35418 Buseck / Germany VAT I.D No.: DE 257 930 159 Trade Register I.D.No.: HRB 3402 Manufacturing I.D. No.: 21659 Managing Director: Günther F. Weber

Open the catalog to page 1

Technical Specification Technical data Material: Stainless Steel EN/DIN 1.4301, K 320 for all parts Dim. sink: Dim. perforated workarea: Dim. Autopsy Table: Rotating worktop: Necessary extraction volume: Optional configurations - Unique „tandem-synchron“ electronic-telescopic height adjustment system: 780 - 1080mm with remote control - Configuration without sink (Length = 2100mm) - “PerfuTek” Inner Body Fixation System concisting of: Electr. pump with adj. pressure / 3 different needles / tubing set. All placed at a detachable platform mounted to the table Optional features / accessories -...

Open the catalog to page 2