MA-1100
3Pages

Catalog excerpts

Product Specification gfw Product: Type: 1100.2 Description Fully hygienic construction for body cooling at +3°C. 2 - tier / 2 small doors. Capacity : 2 corpses Insulation: 80mm polyurethane Foamed with cyclopentane, 100% CFC-free according to norm DIN EN 10204-2.1! 40kg/m3. Insulation: gravity 40kg/m3, heat conductivity 025 acc. to norm EN / DIN 4108. k-value = 0,25 W/m2 K (Kelvin) acc. to norm EN / DIN 52612. Heatbridge free, self supporting cell elements in sandwich construction, connection by means of groove & tongue technique and corrosion protected excentric rod strainer for fast installation. The joints between the panels are closed by means of a unique overlapping system which guarantees optimum hygienic conditions. Proposed furnishings inside the cold room 2 x body trays 2 x body tray support for 2 body trays each with 4 height adjustable feet (40mm) for exact positioning of transfer height. Incl. safety break system (stop) in the back of u-rails to avoid contact with rear wall. Note: the body trays and the body tray supports are not included in the delivery of the cell and must be ordered separately! Construction of floor Absolutely tight against any kind of liquid (even when using steam pressure cleaning systems). Drainage not necessary for hygienic reasons because the dew water is already vaporized. Certified operating temperature: -5°C to +12°C at a surround-ding temperature of +20°C (option 45°C). Gap-free floor and side panels (see enclosed technical drawing) with patented unique overlapping technique. Non-slip floor construction (class R11). Radius of 20mm for best possible hygiene / cleaning MEDIS Medical Technology GmbH Headquarters Adalbert-Stifter-Str. 12 D-94234 Viechtach / Germany MEDIS Medical Technology GmbH Dpt. Marketing and R&D Bachstr. 9 D-35418 Buseck / Germany VAT I.D No.: DE 257 930 159 Trade Register I.D.No.: HRB 3402 Manufacturer I.D. No.: 21659

Open the catalog to page 1

Doors Single door to be opened to the outside with magnetic profile gasket and adjustable hinges. Lever lock system (spring loaded). Cylindric lock and emergency inner opening device when door may be locked from outside. Opening limitation. Both sides covered with stainless steel sheets AISI 306. Insulation: 80mms Door handles with special “compression lever” design Door frame made of stainless steel. Door opening (free opening): 700(W) x 500(H) mm MA-1120 Insert of a body tray Special features - digital temperature display showing temperature of inside of cell incl. over- / under...

Open the catalog to page 2

Refrigeration Data - Evaporator, stainless steel expansion valve, collector / dryer, pressure controller, electrical wire 4m. Refrigeration fluid: R404a Power: AC 230V / 50Hz Refrigeration capacity at +3°C : 950W Noise level: 63dB (A) Prerequisites for cold room installation - water level floor, drain outside cell area for cleaning / waste water - electricity supply: 230V AC / 50Hz Cooling units (made in Germany) with evaporator for installation into ceiling of cold room. Refrigerant: R 404 A Country of Origin Made in Germany by MEDIS MT and Viessmann according to the valid EN / DIN norms...

Open the catalog to page 3