MA-1700-1
6Pages

Product Specification Product: “DryCon HPCS© 1700-1” for one corpus Used for the fixation, preservation and mummification of whole bodies in anatomy. For teaching purposes, mummification of whole bodies and long term “dry” storage of anatomical corpuses by means of a patented high pressure, non-formalin, lacservation system. Type: 1700-1 Concept and Features This new anatomical technology, a first worldwide, was designed to eliminate the use of formalin and to create a closed system for the processing of whole bodies for teaching purposes in anatomy. Consisting of modular units that work autonomous and may be programmed individually, the system also allows the modular units to be fitted together to allow preservation of an unlimited number of cadavers. The number of units to be installed must be determined at the design stage if units are to be located in different rooms. A special advantage is the processing not just of the whole body but also of organs and body parts in a fully closed process chamber, whereby the infiltration solution is pumped into the chamber until the body / organ is fully covered (akin to a closed Tissue Processor in pathology). After this procedure, the body maybe “mummified” for long term storage in a dry environment on a simple shelf. If the body is to be used for a student dissecting course, it can be readily restored to its original “soft” condition. The DryCon unit is also designed for the regeneration, resoftening, examination and repair of ancient mummies in a careful manner. The DryCon unit (module) consists of a solid, and self-carrying construction with automatic electronic control functions to enable one-man operation. Specially developed to guarantee pollution-free fixation and conservation of whole bodies without the use of formalin in a fully closed system that is pressurized with 3 bars in order to speed up, enhance and intensify the infiltration. The DIS infiltration solution is a patented, quality controlled solution MEDIS Medical Technology GmbH Headquarters Adalbert-Stifter-Str. 12 D-94234 Viechtach / Germany MEDIS Medical Technology GmbH Dpt. Marketing and R&D Bachstr. 9 D-35418 Buseck / Germany VAT I.D No.: DE 257 930 159 Trade Register I.D.No.: HRB 3402 Manufacturer I.D. No.: 21659

Product Specification based on a harmless, none-toxic, organic product called “Shellac” (with low concentrations of ethanol). With the approval of leading anatomists, because of the use of Shellac, the patented method is termed “Lacservation”. MA-1450 PerfuTek perfusion system – ready for use 1. Embalming / Perfusion It is of great advantage to the infiltration of any corpus that the embalming is done upfront on a special, extracted embalming table with our “PerfuTek” system. This system contains a pump with an adjustable pressure, a container with DIS-solution and several needles for the...

Product Specification switch “Infiltration” is pushed and the 1000 litres of DIS are pumped into the process chamber. After the corpus is fully covered, the filling process stops automatically and the unit is building up the 3 bar pressure inside the process chamber. Depending on the size of the corpus the infiltration phase is normally finished after 12 hours if 3 bar pressure was applied. Also the fat has been removed from the body and is separated automatically by means of an integrated fatseparator device. The Processing Steps (contd.) The DIS is now returned to the DIS-reservoir so...

Product Specification can be started. This will fill the process chamber with DIS only until up to 5 cms below the body tray. This means the corpus will not be immersed in DIS at all. Due to the evaporation of the Shellac/ Ethanol mixture the environment above the liquid will be totally vaporised – keeping the corpus wet and soft. The complete fast process can be programmed in and runs automatically. The corpuses may also kept soft by putting them into a plastic bag with zipper – leaving them on the dissecting tables for a longer period of time. However, this is sometimes not so convenient...

Product Specification ;rvation fluid. back to it's main container with 820 litres After the unit has been installed in a levelled place the only necessary connections must be made to 400V / 16A electricity. These are the only in-house preparations for the DryCon unit. It is not necessary to install expensive fume extraction systems - nor is it of importance to protect the students / employees against the fatal negative effects of inhaling formalin fumes. Main Elements of the DryCon Unit - Pressure pump for operating pressure up to: 3,0 bars - Seamless drawn body tray with positive (convex)...

Product Specification Tank 3 with DIS concentrate for autom. pH - value adjustm.: 180 litres Loading height of body tray measured from floor:900mms Operating pressure during infiltration: 3bars Unit with rollers for easy movement in case of maintenance Unit with crane lifting devices on top of unit for easy placement Complete filling volume at first installation: 1200 litres DIS solution* *this volume lasts for one year, depending how many corpses were infiltrated and if the corpses have been embalmed with the PerfuTek perfusion system before insertion into the DryCon process chamber!...