MA-3500
1 / 3Pages

Catalog excerpts

Product Specification GFW Product: Cat.-No.: Multifunction Autopsy Table with side wall extraction and automatic body transfer. Fixed height MA-3500 Multifunction Autopsy Table with side wall extraction and automatic body transfer. Fixed height Description New multifunction dissecting table concept for the easy exchange of 3 different worktops (anatomy, embalming and pathology). The upper part of the table is formed like a trough. This plenum has a residue strainer (130x260x135mm deep). At the two flank walls of the table so called “double slots” are present for an effective fume extraction regulated by an external fan or central extraction system. The waste air is drawn through the pedestal and further through the floor into the atmosphere. The electrical vertically adjustable Universal Transporter MA-2010 or a scissor type lift truck is used for docking to the multifunction table in order to do the transfer of the body tray. MA-3500 Anatomy version with dissecting worktop MA-3507 We guarantee: - pollutant and odourless air in the breathing area of the user - no air noises - no draughts MA-3500 Pathology version with autopsy worktop MA-3505 The following easily interchangeable body trays are available: MA-3505 worktop for pathology with 3 drain channels and negative embossment MA-3506 worktop for embalming with 4-part, perforated grid plates for the best possible fume extraction MA-3507 worktop for gross anatomy student education and forensic medicine (transfer worktop with 8 small wheels) Concept and functions The area below the work plate (plenum) has a noise dampening coating. The worktops have drain holes for effective liquid drainage into the plenum and the residue sink i. e. strainer. A flap at the end of the table top serves for docking the Universal Transporter with electronic elevation adjustment if one uses the transfer worktop (body ray) with 8 small wheels. MEDIS Medical Technology GmbH Headquarters Adalbert-Stifter-Str. 12 D-94234 Viechtach / Germany MEDIS Medical Technology GmbH Dpt. Marketing and R&D Bachstr. 9 D-35418 Buseck / Germany MA-3500 Embalming / Forensic version with worktop MA-3507 VAT I.D No.: DE 257 930 159 Trade Register I.D.No.: HRB 3402 Manufacturer I.D. No.: 2165

Open the catalog to page 1

The sink has a standpipe overflow valve. Hot- / cold water mixer tap with two presettings. A flexible shower (3 m) over the sink, can be positioned at the same time centric to the organ table which is movable over the complete body length. Pedestal with 2 inspection doors for easy accessibility to exhaust air or sanitary installations. 2 x 230V electrical outlets, splash water proof (IP64) . Tail gate for transfer worktop (body tray). The special construction of the air slots as well as a slot cover prevents water and waste to enter the air extraction system. Body transfer procedure...

Open the catalog to page 2

- "transfer" worktop made of plastic for X-ray work e.g. in forensic medicine - worktop surface with cm grid graduation. Laser technology for use in forensic medicine - autopsy instrument sets (all versions) - cover for extraction slots (when cleaning the plenum) - fresh air inlet unit (ceiling mounted) with adjustable louvers and illumination MA-0986 Stainless steel headrest with rubber feet (also available in full rubber) - hydro aspirator Note: The "Dome" extraction We produce the so called “Dome” extraction system only at the request of our customer and do not guarantee the...

Open the catalog to page 3