Product Specification Product: Hydraulic Cuvette for 6 Bodies Cat.-No.: MM-301-1347-00 0 Hydraulic cuvette for 6 bodies, suctioned Description Cuvettes for the preservation of body dispensers (immersion system) for use in anatomy. The preservation media are freely selectable. Height adjustment is hydraulic. system optionally also explosion-proof. The system consists of the preservation tank, an insert for 6 body dispensers with a tight-fitting lid. Hydraulic power unit with control cabinet can be installed in a separate room. The insert with the bodies is raised and lowered by a hydraulic drive. The 3 mm thick stainless steel container is braced and completely encased in stainless steel sheet EN/DIN 1.4301. The closure lid has a circumferential silicone seal for complete sealing against escaping gases. The support frame for the body is attached to the closure lid and is moved up and down together with the lid. The lying surfaces of the support frame are perforated to guarantee sufficient liquid throughput. The hydraulic power unit has 1 pump per cylinder for the synchronous positioning of the mounting frame. The connection to the cuvette is made by pipelines or hose lines. Control of the cuvette via push buttons for UP / DOWN in explosion-proof design. Cylinder in special design. Whole-body preservation cuvette (exhaust air surround optional) when closed 1 Meissner Medical GmbH Theodor-Meissner-Straße 4 35216 Biedenkopf Telefon: 06461 802-0 [email protected] www.meissnermedical.eu

Product: Hydraulic Cuvette for 6 Bodies Cat.-No.: MM-301-1347-00 • Material: Stainless steel EN DIN 1.4301/ AISI 304 K 320 (alternative material on request) • External dimensions (L/W/H): 2730 x 1810 x 3340 mm fully extended. • Tank from Cuvette (L/B/H): 2174 x 1450 x 1520 mm • Max tank capacity: 4800 litres • Load capacity insert for body dispenser total: 750g • Cuvette empty weight: approx. 1,600 kg • Total weight with reagent and 6 body donors: approx. 6,500 kg • Control (UP / DOWN): via push button • Electrical connection: 3 phases each 230Volt / 16 A fused • Height adjustment of the cuvette...

Product Specification Product: Hydraulic Cuvette for 6 Bodies Cat.-No.: MM-301-1347-00 0 On-site preparations • Openings for hydraulic lines (option) Channels to the cuvettes for hydraulic lines and control cables Electrical connection 3 phases each 230V / 16 A fused The provisions of the AwSV must be observed. Country of manufacture Manufactured in Germany by Meissner Medical GmbH in accordance with ISO 9001 and the applicable EN standards and occupational health and safety regulations. 3 Meissner Medical GmbH Theodor-Meissner-Straße 4 35216 Biedenkopf Telefon: 06461 802-0 [email protected]...