Semi-automatic floor standing Cryostat M630 Advantages of the Cryostat M630 » Ergonomic design for sitting and standing operation » Highly precise microtome inside made in Germany » 15 specimen positions incl. 2 with peltier cooling » Automatic defrost » Heated window » Surfaces and cryo chamber are easy to clean The Cryostat M630 is a semi-automatic device with an integrated, yet independent flash-freezing unit. The ergonomical open top design enables standing and sitting operation. Cushioned armrests increase the user comfort. The cryo chamber of the Cryostat M630 is reflection-free illuminated with LED lights. The fast freezing stage inside offers space for 12 specimen positions (-35 °C) and also space for specimen at a fast freezing point (cools down to max. -50 °C). Values of chamber, section and coarse thickness as well as drefrost cycler and amount of travel are resettable. A drainage system for the condensation water is included. It has a detachable container, which is outside the instrument for easy access. All surfaces are even and easy to clean for a hygienic workflow. The Cryostat M630 is also equipped with an automatic defrost cycler for defrosting on demand, and a window that is heated, to avoid freezing. The semi-automatic microtome‘s main movement is operated by an ergonomic flywheel, smooth and balanced for ergonomic handling. Its thickness control can be found outside the chamber. A high precision stepping motor manages coarse feed movement. Backlash cross roller bearings are minimized, while free vertical movement is maintained. Arriving at the home and end position is indicated with an audible alert. www.medite.de • info@

Semi-automatic floor standing Cryostat M630 Technical Data Microtome Sectioning range, setting values Trimming range, setting values Specimen retraction Horizontal specimen feed Vertical lift Specimen fine orientation Cryo Chamber Temperature range Defrosting Fast freezing rail Overall Dimensions (W/D/H) Power Supply Cat. No. 04-5300-00 1 µm to 99 µm in 1 µm steps 5 µm to 100 µm in 5 µm steps 100 µm to 500 µm in 50 µm steps 25 µm 30 mm 68 mm 360° in Z and 8° in X and Y axes down to -35 °C (+/- 1 °C) automatic and manual, max. +6 °C 15 positions, 2 with peltier cooling Temperature ca. -20 °C below...