Professional Resin Infusion Catch Pot Resin Trap Top Clear
1Pages

{{requestButtons}}

Catalog excerpts

Professional Resin Infusion Catch Pot Resin Trap Top Clear - 1

Professional high quality resin catch pot designed and manufactured by Burhani Hardware And Fittings BHFTECH in India. This expertly engineered catch pot is designed to provide trouble free operation and service even in the busiest composites workshop. The resin infusion catch pot is manufactured from Stainless steel and base, for a hard wearing and chemical resistant finish. The BHFTECH sturdy resin infusion catch pot features a laser finished 12 mm unbreakable clear Bullet Proof lid which allow good visibility into the pot during usage. A heavy duty custom made rubber provides positive seal and a high quality vacuum gauge with airtight resin line and Two vacuum line connections which are Inlet and Outlet The resin trap vacuum chamber is designed so that paper liners are easily replaced to avoid fouling the inside of the pot. BHFTECH also provide Liners to ensure resin vacuum trap chamber provides best performance with the availability of replacement Lids, Silicone Seals and pneumatic fittings. Sturdy Steel Construction Stainless Steel Mirror Finish Heavy Duty Positive Silicone Seal Laser Cut 12mm Bullet Proof Clear Lid Vacuum Gauge Spare Parts Available Description This resin catch-pot is designed specifically for small to medium scale resin infusion projects.The catch-pot sits between your vacuum pump and the resin infusion project ensuring that any excess resin from the infusion is not drawn down the vacuum line and into the vacuum pump, preventing damage or total destruction of the pump. The catch-pot has a see-through lid so that you can keep an eye on resin accumulating inside the catch-pot (in catch-pot liners) and includes a barb-type fittings to allow easy connection of the vacuum line and an easy-to-tighten fitting for the resin line from your infusion project (hoses not included). Each catch-pot is vacuum tested before shipping. Fitting/Thread Information The lid is connected to the vacuum pump via the 8mm brass hose-tail barb connector using a Vacuum Hose. The vacuum bag or resin infusion project is connected to the catch-pot by through the black plastic gland nut. The gland nut is also designed to accept OD hose. To ensure a permanent, reliable and airtight seal the lid of our catch-pot comes with the vacuum gauge, gland connector and hosetail barb. The vacuum gauge and hose-tail barb both screw into the lid using a 1/4 BSP thread. Capture excess resin and protect your pump! Measuring range of vacuum gauge:0-29.25inHg Unique Catch Port Design: An additional hose can be installed at the port inside the tank to facilitate accurate collection of resin. 5 Feet Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4″ SAE. gasket to be used many times without deterioration. Model No Capacity Gallon Capacity Litres Custom Sizes Manufactured on Demand 110 General Patters Road. Chennai – 600002. India. +919677296252, bhftech.info@gmail.co

Open the catalog to page 1

All Meditech Technologies India catalogs and technical brochures

  1. walk in cooler

    11 Pages

  2. cold room

    10 Pages

  3. co2 incubator

    15 Pages

  4. BOD Incubator

    10 Pages

  5. Incubator

    2 Pages

  6. MTCR 60

    6 Pages

  7. MTPS432

    5 Pages

  8. MTPS360

    5 Pages

  9. MTPS288

    5 Pages

  10. MTPS216

    5 Pages

  11. MTPS144

    5 Pages

  12. MTPS72

    5 Pages

  13. MBDW80

    11 Pages

  14. MBDW120

    11 Pages

  15. MBDW40

    11 Pages

  16. Camping Cot

    1 Pages

  17. MTR30

    3 Pages

  18. MTR26

    3 Pages

  19. ME7-2

    3 Pages

  20. ME8

    8 Pages

  21. MTBDR16

    3 Pages

  22. MTAC60

    7 Pages

  23. MTAC40

    7 Pages

  24. MTAC26

    3 Pages

  25. MA1000

    3 Pages

  26. Spirometer

    1 Pages

  27. Cold rooms

    10 Pages

Archived catalogs