TECHNICAL SPECIFICATION It is two-part epoxy system for casting, coatings, and adhesive applications. It is a range of high-performance user- friendly epoxy resins APPLICATION Sculpture & Art Casting Physical State Colour Viscosity (mPas 25 ºC) Mixing Ratio Gel Time @ 25 ºC (Min) HARDENER Low Viscous Liquid Light Dull Transparent White 1200 10 PARAMETERS RESIN Low Viscous Liquid Light Dull Transparent White 1100 100 FEATURES & BENEFITS: High Gloss Finishing Can be Pigmented using suitable pigments Very less shrinkage Excellent moisture protection barrier, stable in acidic pH solutions Excellent flow properties (low viscosity) with efficient substrate wetting Unique mechanical properties STORAGE & PRE –MIXING: The two components ( Resin & hardener ) should be stored in separate at all times prior to use. Store in cool , Dry & Away from Sun Light. Warm Temperature should be avoided in storage area , Warm temperature reduce the shelf life. The handling equipment & the storage area should be free from chemical residue , Foreign matters. TECHNICAL GUIDELINES FOR USING: • Measure the Part A ( Resin ) and the Part B ( Hardener ) in two separate containers. • Transfer Part A into the suitable Glass Beaker • Start gentle stirring • After stirring the part A, transfer Part B to it. • Continue the gentle stirring & Reaction to progress. • Take care not to get air trapped within mixture • The Mixed epoxy resin should be applied or poured within 5-10 min Time. • For design applications, Degassing may be required to remove the Air bubbles from the texture. • Upon curing remove the material from moulds. SHELF LIFE: Twelve (12) months from date of shipment when stored at 25ºC in the original sealed packages. FIRST AID: Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention. Skin Contact: In case of skin contact, wash thoroughly with soap and water; remove contaminated clothing and launder before reuse; seek medical attention if rash develops. Ingestion: Do not induce vomiting unless instructed by a physician. Contact physician immediately. Home Projects & Hobbies Encapsulation & Display Model /Prototype Making Open & closed molds Industrial coating and component making Lamination/ Coating Cast resin 110 General Patters Road. Chennai – 600002. India. +919677296252,