*mymedicalexpo

Catalogs
Meditech Technologies India
Liquid Silicone Resin for Artificial Stone Mold Making

Liquid Silicone Resin for Artificial Stone Mold Making

Product catalog summary

Certifications: The document mentions that the product is certified with ISO 9001, ISO 1400, ISO 13485, CE, and WHO-GMP standards, indicating compliance with quality, environmental, medical device, European conformity, and good manufacturing practices.

Technical Specifications: The document provides specifications for different grades of silicone rubber used in mold making, categorized by hardness and color:

BAS15: Soft hardness, 15 Shore, Blue, suitable for detailing.
BAS20: Medium hardness, 20 Shore, White, suitable for production and detailing.
BAS25: Hard, 25 Shore, Green, suitable for production.

Product Description: The product is a Liquid Silicone Rubber with a curing agent, used in mold making and casting processes.

Procedure for Mold Making and Casting: The document outlines a six-step process:

Select a mold making method and mold rubber.
Construct a mold box and prepare the sculpture.
Measure, mix, and pour silicone mold rubber.
Demold the sculpture.
Cut the mold.
Perform casting.

A mold is described as a negative cavity for creating multiples, while a cast is the positive reproduction of the original sculpture.

Application: The silicone rubber is noted for its durability in production casting of artificial stone and tiles.

Packing Sizes: Available in 1 kg, 10.5 kg, and 21 kg packages.

Contact Information: Address: 110 General Patters Road, Chennai – 600002, India. Phone: +919677296252, Email: [email protected]

Catalog excerpts

Liquid Silicone Resin for Artificial Stone Mold Making-1

TECHNICAL SPECIFICATION Liquid Silicon Rubber (With Curing Agent) A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold. When an STONE AND TILES model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums Best known for standing up to production casting of ARTIFICIAL STONE AND TILES This article details the steps that we took throughout the mold making and casting process: Step 1: Select a Mold Making Method & Mold Rubber Step 2: Construct Mold Box & Prepare Sculpture Step 3: Measure, Mix & Pour Silicone Mold Rubber Step 4: Demold Step 5: Cut the Mold Step 6: Casting Soft Hardness – Good for detailing Medium Hardness - Good for production and detailing Hard – Good for Production Packing Size: 1kg , 10.5 kg and 21 kg 110 General Patters Road. Chennai – 600002. India. +919677296252, bhftech.info@gmail.

Open the catalog to page 1

All Meditech Technologies India catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list