*mymedicalexpo

Catalogs
Meditech Technologies India
Liquid Silicone Resin for Soap Mold Making

Liquid Silicone Resin for Soap Mold Making

Product catalog summary

Certifications: The document mentions that the product is certified with ISO 9001, ISO 1400, ISO 13485, CE, and WHO-GMP standards, indicating compliance with quality, environmental, medical device, European conformity, and good manufacturing practices.

Technical Specifications: The document provides specifications for different grades of silicone rubber:

BSP15: Soft hardness, 15 Shore, Blue color, suitable for detailing.
BSP20: Medium hardness, 20 Shore, White color, suitable for production and detailing.
BSP25: Hard, 25 Shore, Green color, suitable for production.

Product Description: The document describes the use of liquid silicone rubber with a curing agent for mold making and casting processes. It outlines the steps involved:

Select a mold making method and mold rubber.
Construct a mold box and prepare the sculpture.
Measure, mix, and pour silicone mold rubber.
Demold the sculpture.
Cut the mold.
Perform casting.

A mold is defined as a negative or hollow cavity used to create multiples of a piece, while a cast is the positive reproduction of the original sculpture.

Applications: The document highlights the use of the product for creating reproductions of SOAP models, which can be used as gifts, for display, or for sale. The silicone rubber is noted for its durability in production casting of SOAP.

Packing Sizes: The product is available in packing sizes of 1 kg, 10.5 kg, and 21 kg.

Contact Information: The document provides contact details for the company located at 110 General Patters Road, Chennai – 600002, India, with a phone number and email address for inquiries.

Catalog excerpts

Liquid Silicone Resin for Soap Mold Making-1

TECHNICAL SPECIFICATION Liquid Silicon Rubber (With Curing Agent) A mold is the negative or hollow cavity produced around a sculpted piece for use in creating multiples of that piece. A cast is the positive or reproduction of the original piece of sculpture created by pouring casting material into a pre-formed mold. When an SOAP model has been completed, reproductions of the piece are often needed as gifts, for display, even for sale. To make the reproduction, a mold and cast of the model must be made in one of a variety of casting mediums Best known for standing up to production casting of SOAP This article details the steps that we took throughout the mold making and casting process: Step 1: Select a Mold Making Method & Mold Rubber Step 2: Construct Mold Box & Prepare Sculpture Step 3: Measure, Mix & Pour Silicone Mold Rubber Step 4: Demold Step 5: Cut the Mold Step 6: Casting Soft Hardness – Good for detailing Medium Hardness - Good for production and detailing Hard – Good for Production Packing Size: 1kg , 10.5 kg and 21 kg 110 General Patters Road. Chennai – 600002. India. +919677296252, bhftech.info@gmail.

Open the catalog to page 1

All Meditech Technologies India catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list