Pressure Feed Pot For Painting Application Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The BHFTECH range is equipped with easy to operate air regulators to set the desired fluid outlet pressure and safety pressure relief valves. Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation. BHFTECH Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME. BHFTECH have a pressure tank to fit every industrial application. •Fully approved and CE marked to the latest pressure equipment directive 97/23/EC •Constructed from Heavy Gauge steel with forged steel clamps •Stainless Steel & Carbon Steel Plated range covers ALL industrial applications •Higher pressure rating handles heavier materials •Range offers complete material handling suitability for solvent and •waterborne coatings •Inner Liners reduce cleaning time and save coating material •Top and Bottom outlet conversion kits available •Single air regulator as standard with optional dual outlet kits •S & G type include filler port Capacity Gallon Capacity Litres Custom Sizes Manufactured on Demand 110 General Patters Road. Chennai – 600002. India. +919677296252, bhf