Medical Oxygen Regulator
1 / 4Pages

677-0000-00 Pin Index, Fir Tree Therapy Only (0-15 lpm) Medical Oxygen Regulators • 5 Year Service Interval • Can be manufactured with any international inlet and outlet fittings • Fir Tree Therapy Connection or 9/16th Threaded Therapy Connection available • 0-15 lpm or 0-25 lpm available • Luminous gauge face for night use 677-0001-10 Pin Index, 1x Schrader, Fir Tree Therapy Outlet (0-15 lpm) There are two main uses for the Meditech range of Medical Oxygen Regulators. Units fitted with a pressure outlet, typically 4 bar, are used to provide oxygen to a device which requires an input at this pressure. Primarily, pneumatically powered medical devices such as a ventilator or Demand Valve. The pressure outlet is supplied in accordance with a national or international standard and there is the potential for a second pressure outlet for use with another item. The second outlet may be to the same national or international standard as the first, or it may be different. Units fitted with a flow outlet are used to deliver variable flow rates of oxygen to a patient who requires oxygen therapy. The patient will be breathing on his own but may have a need for support perhaps to supply oxygen enriched air to increase blood oxygen levels. The flow outlet will be either a ‘fir tree connector’ or a threaded outlet. Flow outlets can be switched between different rate in the range of 0.5 lpm (litres per minute) to 15 lpm, with an optional ‘MAX’ setting of approximately 25 lpm used for system purging. Units are available with both a pressure outlet and a flow outlet and these can be used for either purpose of both simultaneously.

REGULATORS CUSTOMISE YOUR OWN REGULATOR Create a Regulator to suit your specific requirements, by following the steps below to generate your REGULATOR PART NUMBER. There are two ranges of Meditech Medical Oxygen Regulators. 55SL (Super Light) regulators which are manufactured using strong lightweight materials, mainly aluminium alloy, however the high-pressure oxygen path is made of brass for extra safety. 55B (Brass) regulators are mainly manufactured using brass which is a robust material with a good ignition resistance, for mobile use in demanding conditions. Choose the Regulator BODY...

INTERNATIONAL FITTINGS INLET TYPES OUTLET TYPES BENELUX BULLNOSE Please contact the Sales Team for further information or any other requirements concerning International Regulators. 9/16th THREADED THERAPY CONNECTOR FIR TREE THERAPY CONNECTOR INTERNATIONAL REGULATOR EXAMPLES 55B Oxygen Regulator with CGA540 Inlet, 1 x AFNOR NF S90-116:1988 Outlet with Fir Tree Therapy Connector. 679-0505-10 55B Oxygen Regulator with a Benelux Bullnose Inlet, 1 x BS Schrader Outlet. 680-0201-10 If you have any further requirements or questions concerning International Regulators, please contact the Sales Team.

Variation of Outlet Pressure when Inlet Pressure is varied at a flow of 50 lpm: ____ 4% Oxygen Therapy Option: For regulators with a Therapy Outlet Flow Selector, the figures represent the flow rate from the ‘Therapy outlet' in litres per minute (lpm). These figures are subject to a tolerance of ±10% of the shown value or ±0.5 lpm whichever is the greater. Oxygen Therapy is easily chosen by rotating the “Therapy Flow Rate Selector" (1). The flow rate is indicated in the display window (2). Therapy flow rates shown below: Oxygen at the chosen flow is discharged from the Therapy Outlet (3)....