BalanceTutor™ Technical Spécification
1 / 5Pages

Catalog excerpts

BalanceTutor™ Technical Spécification - 1

BalanceTutorTM Technical Specification BalanceTutor a dynamic and static postural control trainer 45 Hamelacha, Poleg industrial zone, Netanya, Israel. BalanceTutor technical specification B.140504.doc

Open the catalog to page 1
BalanceTutor™ Technical Spécification - 2

This technical specification covers all critical components and physical elements for the following MediTouch product: The BalanceTutor dynamic and static postural control trainer has been tested to IEC medical standards for electrical safety. It is a Class I, Type BF device. Type BF Medical Equipment 45 Hamelacha, Poleg industrial zone, Netanya, Israel. BalanceTutor technical specification B.140504.doc

Open the catalog to page 2
BalanceTutor™ Technical Spécification - 3

Product name: Product model: Rehabilitation, fall prevention, sports medicine and cardiology. User touch screen display terminal for dada input, setting parameters, data recordings and analysis. Overall dimensions: Running surface: Gross weight: Treadmill kinematics: 7 levels (3...131 sec. from 0 to max. speed) also for deceleration 7 levels (3...131 sec. from 0 to max. speed) also for deceleration Lateral perturbation kinematics: L: 232 cm (92“) W: 161 cm (64“) access height H: 245 cm (97“) Shock load reduction for the joints Belt surface with anti-slip material Max. Permissible load: 150...

Open the catalog to page 3
BalanceTutor™ Technical Spécification - 4

Electrical safety: Isolated transformer: In 230V AC - Out 230V AC. Under IEC-601-60601-1, B-3 UL Recognized, CE. Note: In case the BalanceTutor supplied with an external isolation transformer it required to be fixed to a wall and not be disconnected in any case. Leakage current: Safety power off switch: Emergency-off-switch (mains off), switch for immediate disconnection of motor and motor controllers power supply. Safety stop switch: Stops lateral perturbation if ranges exceeds from norm. Norm = ±20 cm Force sensor: Aluminum-Alloy IP65 single point load cell. X4 units Force range: Location...

Open the catalog to page 4
BalanceTutor™ Technical Spécification - 5

Ambient condition: Relative humidity: Atmospheric pressure: Maximal weight: Height range: Facilitation: Storage temperature: User dimensions: Usage temperature: Minimal room dimensions L: 400cm (160”) W: 300cm (120”) H: 275cm (110”) Device centered at middle of the room. Keep out zone L: 270cm (106”) W: 230cm (90”) To avoid collision at perturbation mode. Floor Exposed concrete or non-parquet coverage Warnings: No children under age of 12 allowed being on or near to the device as well as operate it It is mandatory to fasten the user with harness belt to prevent fall The exercise permanently...

Open the catalog to page 5

All MediTouch catalogs and technical brochures

  1. BalanceTutor

    1 Pages