SAFETY BLOOD COLLECTION NEEDLES Widely accepted safety solution the side-shield flipped over the needle -minimal training required Ergonomic design concaved shield to fit thumb shape and textured surface to improve grip Ultra-sharp, lubricated needle for patient comfort Universal Luer High Fill Rate allows for universal and tight fit to tube holders and multi-sampling Thin-Wall Technology for optimal flow and quick blood collection Safety shield activation methods: Transparent Tube Holder • One-hand operation for convenience – thumb or surface activation • Audible ‘’Click’’ to indicate that safety shield is activated and the needle is permanently locked • improved visibility of collection tubes filling up with blood, • tube holders provided separately or pre-attached

Twist the transparent protective cap counterclockwise to break the sealand pull it straight out to uncover the back-end needle. Flip safety shield back to expose the colored protective cap. Perform venipuncture and collect blood sample according to your facility's policy. The blood should flow into the vacuum blood collection tube based on pressure difference. Gently remove needle from vein and flip the safety shield with the finger (thumb) to cover the needle until audible ''Click'' is heard, which indicates that the needle is locked permanently. Alternatively, press the safety shield against...