video corpo

AMPLIA MRI™ QUAD CRT-D SURESCAN™
11Pages

{{requestButtons}}

Catalog excerpts

AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 1

AMPLIA MRI™ QUAD CRT-D SURESCAN™ Model DTMB1Q1 IS4/DF-1 Product specifications Physical characteristics Volumea Surface area of device can Materials in contact with human tissuec Titanium, polyurethane, silicone rubber, titanium dioxide Hybrid CFx lithium/silver vanadium oxide Volume with connector ports unplugged. The radiopaque ID, which includes a Medtronic-identifier symbol, can be viewed in a fluoroscopic image of the device. c These materials have been successfully tested for the ability to avoid biological incompatibility. The device does not produce an injurious temperature in the surrounding tissue during normal operation. a Replacement indicators Recommended Replacement Time (RRT) < 2.73 V on 3 consecutive daily automatic measurements Maximum energy levels and typical full energy charge times Maximum programmed energy Maximum delivered energya,b Maximum stored energyc Typical charge time at 8.3 s Beginning of Service (BOS)d Typical charge time at Recommended Replacement Time (RRT)d a Energy delivered at connector block into a 50 Ω load. For 35 J programmed energy, delivered energy exceeds 35 J. Energy stored at charge end on capacitor. d Charge time during a nonwireless telemetry session may be slightly higher. b c § MR Conditional § PhysioCurve™ Design § AdaptivCRT™ Algorithm § CardioSync™ Optimization § VectorExpress™ LV Automated Test § Multiple point pacing § SmartShock™ Technology § OptiVol™ 2.0 Fluid Status Monitoring § MVP™ Mode with Complete Capture Management™ D

Open the catalog to page 1
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 2

Device parameters Tachyarrhythmia detection parameters Parameter Fast AT/AF Interval (Rate) AT/AF Interval (Rate)a VF Initial Beats to Detect Therapy Type 50 Hz; Ramp; Burst+ Rx1: Ramp ; Rx2: Burst+ ; Rx3: 50 Hz Fast AT/AF Rx Status Therapy Type 50 Hz; Ramp; Burst+ Rx1: Ramp ; Rx2: Burst+ ; Rx3: 50 Hz VT Initial Beats to Detect VT Beats to Redetect VT Monitor VT Monitor Interval (Rate) Monitored VT Beats to Detect Programmable values Antitachy Pacing (ATP) AT/AF Rx Status FVT Interval (Rate)a VT Interval (Rate) Atrial tachyarrhythmia therapy parameters Parameter The measured intervals are...

Open the catalog to page 2
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 3

Atrial tachyarrhythmia therapy parameters, cont’d. Ventricular tachyarrhythmia therapy parameters Programmable values Programmable values AX>B; B>AX Rx1-Rx4: B>AX ; Rx5-Rx6: AX>B During Charging ; Before Charging; Off Therapy Type Burst ; Ramp; Ramp+ Burst+ parameters Initial # S1 Pulses Interval Decrement Interval Decrement Switch when number of consecutive ATP successes equals Smart Mode VT/FVT Therapy parameters VT Therapy Status Therapy Type CV; Burst; Ramp; Ramp+ Rx1: Burst ; Rx2-Rx6: CV Episode Duration before Rx Delivery AX>B; B>AX Rx1-Rx4: B>AX ; Rx5-Rx6: AX>B Burst therapy...

Open the catalog to page 3
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 4

Ventricular tachyarrhythmia therapy parameters, cont’d. Atrial parameters Programmable values Atrial Amplitude Atrial Pulse Width Atrial Sensitivitya Programmable values Ramp+ therapy parameters … 15 Initial # Pulses Smart Modeb This setting applies to all sensing in this chamber for both tachyarrhythmia detection and bradycardia pacing operations. RV parameters Parameter RV Amplitude Active Can™/SVC Coild Progressive Episode Therapies Shared Settings Programmable values This setting applies to all sensing in this chamber for both tachyarrhythmia detection and bradycardia pacing operations....

Open the catalog to page 4
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 5

RV Capture Management™ parameters Atrial Rate Stabilization parameters Programmable values Programmable values RV Amplitude Safety Margin Maximum Rate RV Minimum Adapted Amplitude Interval Percentage Increment RV Acute Phase Remaining Atrial Preference Pacing parameters Parameter LV Capture Management™ LV Amplitude Safety Margin LV Maximum Adapted Amplitude Search Beats Interval Decrement Maximum Rate Programmable values Programmable values LV Capture Management™ parameters Post Mode Switch Overdrive Pacing (PMOP) parameters Blanking periods Programmable values Post Mode Switch Programmable...

Open the catalog to page 5
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 6

Rate Drop Response parameters Parameter Programmable values Device Tone Rate Drop Responsea Detection Type Drop Size Drop Rate Detection Window Detection Beats Intervention Rate AT/AF Burden and Rate Settings … Alert Urgencyb Avg. V. Rate During AT/AF Alert Enable Patient Home Monitor AT/AF Daily Burden Alert Enablec Avg. V. Rate During AT/AF Alert Enablec When Rate Drop Response is set to On, the lower rate is automatically set to 45 bpm. Shared (Device Tone and Patient Home Monitor) Sleep parameters Parameter Sleep Wake Time Avg. V. Rate During AT/AF Sleep Rate AT/AF Daily Burden...

Open the catalog to page 6
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 7

Lead/Device integrity alerts, cont’d. Parameter Patient Home Monitor Programmable values LV Pacing Impedance Enable On ; Off (Observation only) Alert Enableb This parameter is displayed only if an associated alert has been enabled. Alerts are programmable and transmittable to a monitor only when Patient Home Monitor is programmed to Yes. c If an SVC lead is not implanted, the alert will not sound. b RV Defibrillation Impedance Enable SVC Defibrillation Impedance Enablec Shared parameters Parameter Patient Home Monitor A. Pacing Impedance Enableb SVC Defibrillation Impedance Enableb,c RV...

Open the catalog to page 7
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 8

Data collection parameters, cont’d. Parameter Programmable values Test V. Sensing Episodes Consecutive VS to detect ≥ Device Date/Time Holter Telemetry Sensing Test parameters Modea (enter time and date) Lower Rateb CardioSync Optimization Test parameters ™ This EGM channel displays far-field signals. To display an approximation of a surface ECG signal, choose the Can to SVC EGM source. b An SVC electrode must be present for this configuration. c If the Can to SVC source is selected, the EGM Range is automatically set to ±2 mV. The EGM Range is automatically set to ±8 mV for all other EGM...

Open the catalog to page 8
AMPLIA MRI™ QUAD CRT-D SURESCAN™ - 9

50 Hz Burst induction parameters, cont. Manual defibrillation parameters Selectable values AX>B; B>AX Pacing Rate V. Backup Pacing is delivered to the RV chamber. The default value for this parameter is set according to the permanently programmed settings for bradycardia pacing. c Crosstalk may occur when atrial pacing amplitude is greater than 6.0 V. a Manual cardioversion parameters Fixed Burst Induction parameters Pulse Width VVI Backup (for atrial Fixed Burst)c Pacing Rate Minimum R-R (atrial CV only) Enabled ; Disabled Selectable values Selectable values If the Active Can™/SVC Coil...

Open the catalog to page 9

All Medtronic catalogs and technical brochures

  1. EverFlex™

    4 Pages

  2. Micra™

    12 Pages

  3. Provia™

    4 Pages

  4. Intuition™

    3 Pages

  5. 5392

    2 Pages

  6. Evolut™ PRO+

    12 Pages

  7. SOLOIST™

    2 Pages

  8. BIS

    16 Pages

Archived catalogs

  1. MicroFrance®

    166 Pages

  2. HMS Plus

    6 Pages

  3. Endurant II

    8 Pages

  4. StealthViz

    4 Pages

  5. ENT product

    476 Pages

  6. Parts catalog

    15 Pages