video corpo

VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications
10Pages

{{requestButtons}}

Catalog excerpts

VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 1

VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications Product specifications Physical characteristics Volumea Surface area of device can Materials in contact with human tissuec Titanium, polyurethane, silicone rubber Hybrid CFx lithium/silver vanadium oxide Volume with connector ports unplugged. b The radiopaque ID, which includes a Medtronic-identifier symbol, can be viewed in a fluoroscopic image of the device. c These materials have been successfully tested for the ability to avoid biological incompatibility. The device does not produce an injurious temperature in the surrounding tissue during normal operation. a § PhysioCurve™ Design § CardioSync™ Optimization § VectorExpress™ LV Automated Test Replacement indicators § SmartShock™ Technology ≤ 2.73 V on 3 consecutive Recommended Replacement daily automatic Time (RRT) measurements § OptiVol™ 2.0 Fluid Status Monitoring Maximum energy levels and typical full energy charge times Maximum programmed energy Maximum delivered energy Maximum stored energy Typical charge time at Beginning of Service (BOS)d Typical charge time at Recommended 12.0 s Replacement Time (RRT)d a Energy delivered at connector block into a 50 Ω load. For 35 J programmed energy, delivered energy exceeds 35 J. Energy stored at charge end on capacitor. d Charge time during a nonwireless telemetry session may be slightly higher. b c § Complete Capture Management™ Diagnost

Open the catalog to page 1
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 2

Device parameters Tachyarrhythmia detection parameters Programmable values AT/AF Detection AT/AF Interval (Rate) Fast AT/AF Interval (Rate) The measured intervals are truncated to a 10 ms multiple (for example, 457 ms becomes 450 ms). The device uses this truncated interval value when applying the programmed criteria and calculating interval averages. b The AF/Afl, Sinus Tach, and Wavelet features are automatically set to On when VF Detection is set to On. c This setting applies to all sensing in this chamber for both tachyarrhythmia detection and bradycardia pacing operations. d Carefully...

Open the catalog to page 2
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 3

Atrial tachyarrhythmia therapy parameters, cont’d. Ventricular tachyarrhythmia therapy parameters Programmable values Programmable values AX>B; B>AX Rx1-Rx4: B>AX ; Rx5-Rx6: AX>B During Charging ; Before Charging; Off Therapy Type Burst ; Ramp; Ramp+ Interval Decrement Interval Decrement Switch when number of consecutive ATP successes 1 ; 2; 3; 4; 6; 8; 10 equals Stop Atrial Rx After (Shared) Rx/Lead Suspect Smart Mode Disable Atrial ATP if it accelerates V. rate? Disable all atrial therapies if atrial lead position is suspect? (Atrial Lead Position Check) VT/FVT Therapy parameters VT...

Open the catalog to page 3
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 4

Ventricular tachyarrhythmia therapy parameters, cont’d. Atrial parameters Programmable values Atrial Amplitude Atrial Pulse Width Atrial Sensitivitya Programmable values Ramp+ therapy parameters … 15 Initial # Pulses Programmable values Smart Modeb This setting applies to all sensing in this chamber for both tachyarrhythmia detection and bradycardia pacing operations. Shared Settings V-V Minimum ATP Interval Programmable values Active Can™/SVC Coilc Progressive Episode Therapies This setting applies to all sensing in this chamber for both tachyarrhythmia detection and bradycardia pacing...

Open the catalog to page 4
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 5

RV Capture Management™ parameters Atrial rate stabilization parameters Programmable values Programmable values RV Amplitude Safety Margin Maximum Rate RV Minimum Adapted Amplitude RV Acute Phase Remaining Interval Percentage Increment 12.5; 25 ; 50% Atrial preference pacing parameters Parameter Parameter LV Capture Management™ LV Amplitude Safety Margin LV Maximum Adapted Amplitude Search Beats Interval Decrement Maximum Rate Programmable values Programmable values LV Capture Management™ parameters Post Mode Switch Overdrive Pacing (PMOP) parameters Parameter Parameter PVAB Interval PVAB...

Open the catalog to page 5
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 6

Rate drop response parameters Parameter Rate Drop Responsea Detection Type Avg. V. Rate During AT/AF Alert Enableb Programmable values Drop ; Low Rate; Both Shared (Device Tone and Patient Home Monitor) AT/AF Daily Burden Drop Size Avg. V. Rate During AT/AF Drop Rate Daily Burden for Avg. V. Rate Detection Window Detection Beats Intervention Rate Number of Shocks Delivered in an Episoded Device Tone Alert Enable – Urgency … 150 bpm Patient Home Monitor Alert Enableb When Rate Drop Response is set to On, the lower rate is automatically set to 45 bpm. Shared (Device Tone and Patient Home...

Open the catalog to page 6
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 7

Data collection parameters Lead/Device integrity alerts, cont’d. Parameter Programmable values SVC Defibrillation Impedance Enableb,c Data collection parameters Parameter LECG Source (Leadless ECG)a LV Pacing Impedance Less than RV Defibrillation Impedance Less than RV Defibrillation Impedance Greater than SVC Defibrillation Impedance Less than SVC Defibrillation Impedance Greater than RVtip to RVcoil; RVtip to RVring ; LV1 to RVring; LV1 to RVcoil; LV2 to RVcoil; LV3 to RVcoil; LV4 to RVcoil; LV1 to LV2; LV2 to LV3; LV3 to LV4; LV1 to LV3; LV2 to LV4; LV1 to LV4 LV Pacing Impedance Greater...

Open the catalog to page 7
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 8

System test parameters System test parameters Parameter T-Shock induction parameters Selectable values Parameter Chamber Enabled ; Disabled Pacing Threshold Test parameters Selectable values Enabled; Disabled Test Type (LV test) Amplitude; Pulse Width; Phrenic Nerve Stim - Amplitude; Phrenic Nerve Stim - Pulse Width Test Type (Atrium or RV test) Amplitude; Pulse Width Decrement after Monophasic ; Biphasic AX>B; B>AX If the chamber selected is RV+LV, the delay is set to 2.5 ms with LV pace delivered first. b If the Active Can™/SVC Coil parameter is set to Can Off, the Active Can™ electrode...

Open the catalog to page 8
VIVA™ QUAD S CRT-D Model DTBB1Q1 IS4/DF-1 Specifications - 9

Pacing Rate Enabled ; Disabled Selectable values Applies to all ventricular chambers paced. b V. Backup Pacing is delivered to the RV chamber. c The default value for this parameter is set according to the permanently programmed settings for bradycardia pacing. d Crosstalk may occur when atrial pacing amplitude is greater than 6.0 V. a Manual Ramp therapy parameters Parameter Selectable values Amplitudec Pulse Width Ventricular Ramp therapy parameters VVI Backup (for atrial PES)d Pacing Rate If the chamber selected is RV+LV, the delay is set to 2.5 ms with LV pace delivered first. Default...

Open the catalog to page 9

All Medtronic catalogs and technical brochures

  1. EverFlex™

    4 Pages

  2. Micra™

    12 Pages

  3. Provia™

    4 Pages

  4. Intuition™

    3 Pages

  5. 5392

    2 Pages

  6. Evolut™ PRO+

    12 Pages

  7. SOLOIST™

    2 Pages

  8. BIS

    16 Pages

Archived catalogs

  1. MicroFrance®

    166 Pages

  2. HMS Plus

    6 Pages

  3. Endurant II

    8 Pages

  4. StealthViz

    4 Pages

  5. ENT product

    476 Pages

  6. Parts catalog

    15 Pages